Prof. Saidi

Publications

ISI Journals

● Saidi, M.H., Razaghi, R., Zabetian, M., Experimental and analytical investigation of micro-particle velocity domain and particle-wall interaction in microchannel, International Journal of Nonlinear Analysis and Applications, 15(6) (2024) 173-186.

● Shafiei Souderjani, A., Saidi, M.H., A Simulation study on ionic current in cylindrical hydrophobic nanopores, Iranian Journal of Mechanical Engineering Transactions of the ISME, (2024).

● Rabiee, P., Saidi, M.H., Implementation of Linear Parameter Varying System to Investigate the Impact of Varying Flow Rate on the Lithium-ion Batteries Thermal Management System Performance, arXiv preprint arXiv:2403.01334, (2024).

● Taheri, M., Maerefat, M., Zabetian, M., Saidi, M.H., Theoretical and experimental study for enhancement of filtration performance of nonwoven fibrous media by nonuniform compression, Separation and Purification Technology, 329 (2024) 125198.

● Rabani, R., Saidi, M.H., Rajabpour, A., Joly, L., Merabia, S., Enhanced heat flow between charged nanoparticles and an aqueous electrolyte, Langmuir, 39(43) (2023) 15222-15230.

● Saidi, M.H., Tohidloo, M., Bakhtiari, M., Investigation and simulation of a cooling cycle based on Misotsenko concept, Sharif Journal of Mechanical Engineering, 39(1) (2023) 79-88.

● Safari, A., Saidi, M.H., Salavatidezfouli, S., Yao, S., Numerical investigation of the drag reduction effect in turbulent channel flow by superhydrophobic grooved surfaces, Flow, 3 (2023) E27.

● Shafiei Souderjani, A., Bakouei, M., Saidi, M.H., Taghipoor, M., Electrophoretic motion of hydrophobic spherical particles in nanopore: Characteristics, separation, and resistive pulse sensing, Physics of Fluids, 35(2) (2023).

● Samani, A.K., Borgheie, M., Saeidi, M., Experimental results of pressure fluctuations in a water conduit section due to formation of unstable two-phase air-water flow, Journal of Advanced Materials in Engineering (Esteghlal), 24(2) (2022) 69-86.

● Sajadi, B., Saidi, M.H., Ahmadi, G., Soleimani, M., Numerical modeling of particles resuspension due to human stepping, Energy Equipment and Systems, 10(4) (2022) 401-415.

● Mohammadian, P.K., Saidi, M.H., Mean-line model development for off-design performance prediction of transonic axial compressor of an industrial gas turbine based on computational fluid dynamics database, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 236(8) (2022) 1449-1471.

● Mahboubi, D., Jafari Gavzan, I., Saidi, M.H., Ahmadi, N., Developing an electro-thermal model to determine heat generation and thermal properties in a lithium-ion battery, Journal of Thermal Analysis and Calorimetry, 147(21) (2022) 12253-12267.

● Ghahremani, A., Aramfard, M., Saidi, M.H., An analytical investigation of transient imperfectly expanded turbulent jet, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, (2022) 09544100221077465.

● Alishiri, M., Akbari, A., Saidi, M.H., Thermal performance of a pulsating heat pipe charged with Fe₃O⁴-MWCNTs/DI water hybrid nanofluid: Experimental study and optimization, Journal of Thermal Analysis and Calorimetry, 147(23) (2022) 13535-13550.

● Sadeghi, M., Saidi, M.H., Kröger, M., Tagliazucchi, M., Stimuli-responsive polyelectrolyte brushes for regulating streaming current magnetic field and energy conversion efficiency in soft nanopores, Physics of Fluids, 34(8) (2022).

● Mahboubi, D., Gavzan, I.J., Saidi, M.H., Ahmadi, N., State of charge estimation for lithium-ion batteries based on square root sigma point Kalman filter considering temperature variations, IET Electrical Systems in Transportation, 12(3) (2022) 165-180.

● Rabani, R., Saidi, M.H., Rajabpour, A., Joly, L., Merabia, S., Enhanced Interfacial Thermal Conductance between Charged Nanoparticle and Aqueous Electrolyte, arXiv:2305.15312:(cond-mat.mes-hall), 2023; doi: 10.48550/arXiv.2305.15312.

● Saidi, M.H., Tohidloo, M., Bakhtiari, M., Investigation and simulation of a cooling cycle based on Misotsenko concept, Sharif Journal of Mechanical Engineering, Vol. 39 (1), pp. 79-88, 2023; doi: 10.24200/j40.2022.60517.1648.

● Safari, A., Saidi, M.H., Salavatidezfouli, S., Yao, Sh., Numerical investigation of the drag reduction effect in turbulent channel flow by superhydrophobic grooved surfaces, Flow (Cambridge Core), In Press, 2023.

● Sajadi, B., Saidi, M.H., Ahmadi, G., Soleimani, M., Numerical modeling of particles resuspension due to human stepping, Energy Equipment and Systems, Vol. 10(4), pp. 401-415, 2022; doi: 10.22059/ees.2022.701327..

● Alishiri, M., Akbari, A., Saidi, M.H., Thermal performance of a pulsating heat pipe charged with Fe₃O₄-MWCNTs/DI water hybrid nanofluid: Experimental study and optimization, Journal of Thermal Analysis and Calorimetry, Vol. 147, pp. 13535–13550, 2022; doi: 10.1007/s10973-022-11517-y..

● Mahboubi, D., Gavzan, I.J., Saidi, M.H., Ahmadi, N., State of charge estimation for lithium‐ion batteries based on square root sigma point Kalman filter considering temperature variations, IET Electrical Systems in Transportation, pp. 1-16, 2022.

● Hosseini Abadshapoori, M., Saidi, M.H., Numerical simulation of MHD mixed convection flow of Al2O3–water nanofluid over two hot obstacles, Heat Transfer (Wiley Online Library) , 1-20, 2022; doi:10.1002/htj.22446.

● Niroomand, R., Saidi, M.H., Hannani, S.K., A new multiscale modeling framework for investigating thermally-induced flow maldistribution in multi-stream plate-fin heat exchangers, International Journal of Heat and Mass Transfer 180, 121779, 2021.

● Vakili, M.A., Sadeghi, M., Saidi, M.H., Moosavi, A., Ionic transport and selectivity of electrokinetically-actuated non-Newtonian flows within a pH-regulated rectangular nanochannel, arXiv preprint arXiv:2111.04057, 2021.

● Rabani, R., Saidi, M.H., Joly, L., Merabia, S., Rajabpour, A., Enhanced local viscosity around colloidal nanoparticles probed by Equilibrium Molecular Dynamics Simulations, The Journal of Chemical Physics 155 (17), 174701, 2021.

● Korouyeh, M.M., Saidi, M.H., Najafi,M., Aghanajafi, C., A simplified analytical model for predicting the heating performance of single U-tube underground heat exchangers, Scientia Iranica 28 (2), 847-859, 2021.

● Mohammadian Korouyeh, M., Saidi, M.H., Najafi, M., Aghanajafi, C., Selection of prime mover to meet heating demand of a single effect absorption chiller based on laws of thermodynamics, SN Applied Sciences, pp. 1-12, 2021.

● Jiryaei, Z., Saidi, M.H., Effect of collision on self-assembly of nanoparticles in zirconia microparticle suspension, Journal of Dispersion Science and Technology , pp. 1-9, 2020.

● Sadeghi, M., Saidi, M.H., Moosavi, A., Kröger, M., Tuning Electrokinetic Flow, Ionic Conductance, and Selectivity in a Solid-State Nanopore Modified with a pH-Responsive Polyelectrolyte Brush: A Molecular Theory Approach, The Journal of Physical Chemistry C , Vol. 124 (34), pp. 18513-18531, 2020.

● Niroomand, R., Saidi, M.H., Hannani, S.K., A general multi-scale modeling framework for two-phase simulation of multi-stream plate-fin heat exchangers, International Journal of Heat and Mass Transfer , Vol. 156, 119730, 2020.

● Sadeghi, M., Saidi, M.H., Moosavi, A., Sadeghi, A., Unsteady solute dispersion by electrokinetic flow in a polyelectrolyte layer-grafted rectangular microchannel with wall absorption, Journal of Fluid Mechanics, 887, A13, 2020.

● Gandomkar, A., Kalan, K., Vandadi, M., Shafii, M.B., Saidi, M.H., Investigation and visualization of surfactant effect on flow pattern and performance of pulsating heat pipe, Journal of Thermal Analysis and Calorimetry, 139 (3), pp. 2099-2107, 2020.

● Mohammadian Korouyeh, M., Saidi, M.H., Najafi, M., Aghanajafi, C., A simplified analytical model to predict heating performance of single U-tube ground heat exchangers, Scientia Iranica, 2020, Accepted in Press.

● Saidi, M.H., Sajadi, B., Ahmadi G., Computer modeling of the operating room ventilation performance in connection with surgical site infection, Scientia Iranica: Transactions on Mechanical Engineering (B), Vol. 27 (2), pp. 704-714, 2020.

● Reshadi, M., Saidi, M.H., Tuning the dispersion of reactive solute by steady and oscillatory electroosmotic–Poiseuille flows in polyelectrolyte-grafted micro/nanotubes, Journal of Fluid Mechanics, Vol. 880, pp. 73-112, 2019.

● Keshavarz Mohammadian, P., Saidi, M.H., Simulation of startup operation of an industrial twin-shaft gas turbine based on geometry and control logic, Energy, Vol. 183 (15), pp. 1295-1313, 2019.

● Sajadi, B., Saidi, M.H., Ahmadi, G., Numerical evaluation of the operating room ventilation performance: ultra-clean ventilation (UCV) systems, Scientia Iranica, Vol. 26 (4), pp. 2394-2406, 2019.

● Niroomand, R., Saidi, M.H., Hannani, S.K., A quasi-three-dimensional thermal model for multi-stream plate fin heat exchangers, Applied Thermal Engineering, Vol. 157, 2019.

● Balotaki, H.K., Saidi, M.H., Design and Performance of a Novel Hybrid Photovoltaic–Thermal Collector with Pulsating Heat Pipe (PVTPHP), Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 43 (2), pp. 1-11, 2019.

● Biglarian, H., Saidi, M.H., Abbaspour, M., Economic and environmental assessment of a solar-assisted ground source heat pump system in a heating-dominated climate, International Journal of Environmental Science and Technology, Vol. 16 (7), pp. 3091-3098, 2019.

● Ghaebi, H., Bahadori, M.N., Saidi, M.H., Different operational alternatives of aquifer thermal energy storage system for cooling and heating of a residential complex under various climatic conditions in Iran, Scientia Iranica, Vol. 26 (3), 1281-1292, 2019.

● Mohammadian Korouyeh, M., Saidi, M.H., Najafi, M., Aghanajafi, C., Evaluation of desiccant wheel and prime mover as combined cooling, heating, and power system, International Journal of Green Energy, Vol. 16 (3), 256-268, 2019.

● Akbari, A., Saidi, M.H., Experimental investigation of nanofluid stability on thermal performance and flow regimes in pulsating heat pipe, Journal of Thermal Analysis and Calorimetry, vol. 135 (3), 1835-1847, 2019.

● Khademi, A. Saidi, M.H., Darbandi, M., Schneider, G.E., Numerical Study of Patient Respiration Effect on Bacterial Dispersion in a Surgery Room, Journal of Fluid Flow, Heat and Mass Transfer, Vol. 6, pp. 49-59, 2019.

● Reshadi, M., Saidi, M.H., The role of ion partitioning in electrohydrodynamic characteristics of soft nanofluidics: Inclusion of EDL overlap and steric effects, Chemical Engineering Science, Vol. 190, 443-458, 2018.

● Hosseini Abadshapoori, M., Saidi, M.H., 3D investigation of natural convection of nanofluids in a curved boundary enclosure applying lattice Boltzmann method, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 28 (8), pp. 1827-1844, 2018.

● Hosseini Abadshapoori, M., Saidi, M.H., Lattice Boltzmann simulation of TiO2-water nanofluid in a curved boundary domain at high Rayleigh numbers, Computers & Fluids, Vol. 168, pp. 159-169, 2018.

● Ghahremani, A.R., Jafari, M., Ahari, M., Saidi, M.H., Hajinezhad, A., Mozaffari, A.A., Spray characteristics and atomization behavior of bio-diesel (Norouzak) and diesel fuel blends, Particulate Science and Technology, Vol. 36 (3), pp. 270-281, 2018.

● Reshadi, M., Saidi, M.H., A Ebrahimi, Pure axial flow of viscoelastic fluids in rectangular microchannels under combined effects of electro-osmosis and hydrodynamics, Theoretical and Computational Fluid Dynamics, Vol. 32 (1), pp. 1-21, 2018.

● Biglarian, H., Abbaspour, M., Saidi, M.H., Evaluation of a transient borehole heat exchanger model in dynamic simulation of a ground source heat pump system, Energy, Vol. 147, pp. 81-93, 2018.

● Aghakashi, V., Saidi, M.H., Turbulent decaying swirling flow in a pipe, Heat Transfer Research, Vol. 49 (16), 2018.

● Schneider, G.E., Ghafourizadeh, M., Darbandi, M., Saidi, M.H., Exhaust Soot Investigation in a JP Combustor Working at Various Wall Temperature Considerations, AIAA Aerospace Sciences Meeting, No. 1414, 2018.

● Sadeghi, M., Saidi, M.H., Moosavi, A., Sadeghi, A., Geometry effect on electrokinetic flow and ionic conductance in pH-regulated nanochannels, Physics of Fluids, Vol. 29 (12), 122006, 2017.

● Ghaebi, H., Bahadorinejad, M., Saidi, M.H., Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer, Energy Equipment and Systems, Vol. 5 (4), pp. 341-348, 2017.

● Helisaz, H., Saidi, M.H., Sadeghi, A., Reduction of production rate in Y-shaped microreactors in the presence of viscoelasticity, Analytica chimica acta, Vol. 990, pp. 121-134, 2017.

● Alipoor, A., Saidi, M.H., Numerical study of hydrogen-air combustion characteristics in a novel micro-thermophotovoltaic power generato, Applied Energy, Vol. 199, pp. 382-399, 2017.

● Shirinzadeh, F., Saidi, M.H., Davari, A., Experimental investigation of slip velocity and settling distribution of micro-particles in converging–diverging microchannel, Microsystem Technologies, Vol. 23, pp. 3361-3370, 2017.

● Eslami, J., Abbassi, A., Saidi, M.H., Numerical simulation of the effect of visitor’s movement on bacteria-carrying particles distribution in hospital isolation room, Scientia Iranica: Transaction B, Mechanical Engineering, Vol. 24 (3), 2017.

● Sadeghi, M., Saidi, M.H., Sadeghi, A., Electroosmotic flow and ionic conductance in a pH-regulated rectangular nanochannels, Physics of Fluids, Vol. 29 (6), 2017.

● Gandomkar, A., Saidi, M.H., Shafii, M.B., Vandadi, M., Kalan, K., Visualization and comparative investigations of pulsating ferro-fluid heat pipe, Applied Thermal Engineering, Vol. 116, pp. 56-65, 2017.

● Biglarian, H., Abbaspour, M., Saidi, M.H., A numerical model for transient simulation of borehole heat exchangers, Renewable Energy, Vol. 104, pp. 224-237, 2017.

● Ghaebi, H., Bahadori, M.N., Saidi, M.H., Economic and environmental evaluation of different operation alternatives to aquifer thermal energy storage in Tehran, Iran, Scientia Iranica: Transaction B, Mechanical Engineering, Vol. 24 (2, 2017.

● Arash, A., Saidi, M.H., Najafi, M., Second law analysis of an infinitely segmented magnetohydrodynamic generator, Journal of Magnetism and Magnetic Materials, Vol. 426, pp. 294-301, 2017.

● Balotaki, H.K., Saidi, M.H., Design and performance of multi-purpose vacuum solar collector, Heat and Mass Transfer, Vol. 53, pp. 1-11, 2017.

● Ghahremani, A.R., Saidi, M.H., Hajinezhad, A., Mozafari A.A., Experimental investigation of spray characteristics of a modified bio-diesel in a direct injection combustion chamber, Experimental Thermal and Fluid Science, Vol. 81, pp. 445-453, 2017.

● Ghahremani, A.R., Jafari, M., Ahari, M., Saidi, M.H., Hajinezhad, A., Mozafari, A.A., Experimental and theoretical investigations on spray characteristics of bio-ethanol blends using a direct injection system, Scientia Iranica, Vol. 24, pp. 237-248, 2017.

● Balotaki, H.K., Saidi, M.H., Experimental Investigation of Dual-Purpose Solar Collector using with Rectangular Channels, Journal of Thermal Engineering, Vol. 3, pp. 1052-1059, 2017.

● Ghahremani, A., Ahari, M., Jafari, M., Saidi, M.H., Hajinezhad, A., Mozafari A., Experimental and theoretical study on spray behaviors of modified bio-ethanol fuel employing direct injection system, Thermal Science, Vol. 21, pp. 475-488, 2017.

● Ghahremani, A.R., Karimi, H., Saidi, M.H., Mozafari, A.A., Letter to “A contribution to the understanding of isothermal diesel spray dynamics”, Fuel, Vol. 187, pp. 468-469, 2017.

● Reshadi, M., Saidi, M. H., Investigation of Mixed Electro-Osmotic/Poiseuille Slip Flows of Viscoelastic Fluids in Rectangular Microchannels with Hydrophobic Surfaces, Amirkabir Journal of Mechanical Engineering, Vol. 1, pp. 3-12, 2017.

● Razaghi, R., Saidi, M.H., Experimental investigation of drag and lift forces on microparticles in low Reynolds number poiseuille flow in microchannel, Journal of Dispersion Science and Technology, Vol. 37, pp. 1767-1777, 2016.

● Yousefian, Z., Saidi, M.H., Mass transport analysis of non-Newtonian fluids under combined electroosmotically and pressure driven flow in rectangular microreactors, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 508, pp. 345-359, 2016.

● Helisaz, H., Saidi, M.H., Sadeghi, A., 3D modeling of reaction-diffusion dynamics in an electrokinetic Y-shaped microreactor, Sensors and Actuators B: Chemical, Vol. 235, pp. 343-355, 2016.

● Eslami, J., Abbassi, A., Saidi, M.H., Bahrami, M., Effect of supply/exhaust diffuser configurations on the contaminant distribution in ultra clean environments: Eulerian and Lagrangian approaches, Energy and Buildings, Vol. 127, pp. 648-657, 2016.

● Reshadi, M., Saidi, M.H., Firoozabadi, B., Saidi, M.S., Electrokinetic and aspect ratio effects on secondary flow of viscoelastic fluids in rectangular microchannels, Microfluidics and Nanofluidics, Vol. 20 (117), 2016.

● Ghaebi, H., Bahadorinejad, M., Saidi, M.H., Sensitivity analysis of fluid flow in a confined aquifer using numerical simulation, Journal of Applied Research in Water and Wastewater, Vol. 3, pp. 201-208, 2016.

● Razaghi, R., Saidi, M.H., Transportation and settling distribution of microparticles in low-Reynolds-number Poiseuille flow in microchannel, Journal of Dispersion Science and Technology, Vol. 37, pp. 582-594, 2016.

● Saidi, M.H., Tamim, H., Heat transfer and pressure drop characteristics of nanofluid in unsteady squeezing flow between rotating porous disks considering the effects of thermophoresis and Brownian motion, Advanced Powder Technology, Vol. 27, pp. 564-574, 2016.

● Sadeghi, M., Sadeghi, A., Saidi, M.H., Electroosmotic flow in hydrophobic microchannels of general cross section, Journal of Fluids Engineering, Vol. 138 (3), 2016.

● Keramati, H., Sadeghi, A., Saidi, M.H., Chakraborty, S., Analytical solutions for thermo-fluidic transport in electroosmotic flow through rough microtubes, International Journal of Heat and Mass Transfer, Vol. 92, pp. 244-251, 2016.

● Keramati, H., Saidi, M.H., Zabetian, M., Stabilization of the suspension of zirconia microparticle using the nanoparticle halos mechanism: zeta potential effect, Journal of Dispersion Science and Technology, Vol. 37, pp. 6-13, 2016.

● Hanafizadeh, P. Momenifar, M.R. Bastankhah, M., Saidi, M.H., Thermosyphon Analysis Using the Particle Image Velocimetry Method (PIV)., Industrial Engineering & Management Sharif, Vol. 323, No. 1, pp. 11-20, 2016.

● Zaraki, H.E. Majidniya, M., Abadshapoori, M.H., Saidi, M.H., Experimental investigation of flow regime and efficiency of airlift pumps with tapered upriser pipe, Multiphase Science and Technology, Vol. 28 (2), 2016.

● Aghakashi, V., Keshavarz, P.M., Saidi, M.H., Numerical Analysis of Coherent Structures in Bidirectional Swirl Combustion Chamber, Computational Thermal Sciences: An International Journal, Vol. 8 (3), 2016.

● Abadshapoori, M.H., Saidi, M.H., Simulation of natural convection of nanofluids at high Rayleigh numbers: A two-component lattice Boltzmann study, Computational Thermal Sciences: An International Journal, Vol. 8 (1), 2016.

● Yazdi, A.A., Sadeghi, A., Saidi, M.H., A depthwise averaging solution for cross-stream diffusion in a Y-micromixer by considering thick electrical double layers and nonlinear rheology, Microfluidics and Nanofluidics, Vol. 19, pp. 1297-1308, 2015.

● Yazdi, A.A., Sadeghi, A., Saidi, M.H., Steric effects on electrokinetic flow of non-linear biofluids, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 484, pp. 394-401, 2015.

● Sadeghi, A., Amini, Y., Saidi, M.H., Yavari, H., Shear‐rate‐dependent rheology effects on mass transport and surface reactions in biomicrofluidic devices, AIChE Journal, Vol. 61, pp. 1912-1924, 2015.

● Yazdi, A.A., Sadeghi, A., Saidi, M.H., Electrokinetic mixing at high zeta potentials: Ionic size effects on cross stream diffusion, Journal of Colloid and Interface Science, Vol. 442, pp. 8-14, 2015.

● Ghaebi, H., Bahadori, M.N., Saidi, M.H., Parametric study of the pressure distribution in a confined aquifer employed for seasonal thermal energy storage, Scientia Iranica: Transaction B, Mechanical Engineering, Vol. 22 (1), 2015.

● Aghakashi, V., Saidi, M.H., Mozafari, A.A., Keshavarz, P., Temperature Distribution on a Gas Turbine Shaft Exposed to Swirl Combustor Flue, Journal of Thermophysics and Heat Transfer, Vol. 29, No. 2 (2015), pp. 319-328.

● Chitsaz, I., Saidi, M.H., Mozafari, A.A., CFD based optimization of the mixture formation in spark ignition direct injection CNG engine, Scientia Iranica: Transaction B, Mechanical Engineering, Vol. 21 (5), 2014.

● Sadeghi, M., Sadeghi, A., Saidi, M.H., Gaseous Slip Flow Mixed Convection in Vertical Microducts of Constant but Arbitrary Geometry, Journal of Thermophysics and Heat Transfer, Vol. 28, No. 4, pp. 771-784, 2014.

● Yazdi, A.A., Sadeghi, A., Saidi, M.H., Rheology effects on cross-stream diffusion in a Y-shaped micromixer, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 456, pp. 296-306, 2014.

● Hanafizadeh, P., Raffiee, A.H., Saidi, M.H., Experimental investigation of characteristic curve for gas-lift pump, Journal of Petroleum Science and Engineering, Vol. 116, pp. 19-27, 2014.

● Zabetian, M., Shaffi, M.B., Saidi, M.H., Saidi, M.S., Rohani R., A new experimental app.roach to investigate the induced force and velocity fields on a particulate manipulation mechanism, Scientia Iranica. Transaction B, Mechanical Engineering, Vol. 21 (2), 2014.

● Zabetian, M., Saidi, M.H., Saidi, M.S., Shafii, M.B., Modeling of laser thermal and hydrodynamic effects on a dilute suspension of micro-particles in water, Journal of Mechanical Science and Technology, Vol. 28 (3), 2014.

● Hanafizadeh, P., Moezzi, M., Saidi, M.H., Simulation of gas-liquid two phase flow in upriser pipe of gas-lift systems, Energy Equipment and Systems, Vol. 2, pp. 25-42, 2014

● Sadeghi, A., Baghani, M., Saidi, M.H., Gaseous slip flow mixed convection in vertical microducts with constant axial energy input, Journal of Heat Transfer, Vol. 136 (3), 2014.

● Yavari, H., Sadeghi, A., Saidi, M.H., Chakraborty S., Temperature rise in electroosmotic flow of typical non-newtonian biofluids through rectangular microchannels, Journal of Heat Transfer, Vol. 136 (3), 2014.

● Sadeghi, M., Sadeghi, A., Saidi, M.H., Gaseous Slip-Flow Mixed Convection Through Ordered Microcylinders, Journal of Thermophysics and Heat Transfer, Vol. 28, No. 1, pp. 105-117, 2014.

● Ghaebi, H., Bahadori, M.N., Saidi, M.H., Performance analysis and parametric study of thermal energy storage in an aquifer coupled with a heat pump and solar collectors for a residential complex in Tehran, Iran, Applied Thermal Engineering, Vol. 62, pp. 156-170, 2014.

● Mohammadi, M., Taslimifar, M., Haghayegh, S., Kazemzadeh Hannani S., Shafii, M. B., Saidi, M. H., Afshin H., Open-loop pulsating heat pipes charged with magnetic nanofluids: powerful candidates for future electronic coolers, Nanoscale and Microscale Thermophysical Engineering, Vol. 18, pp. 18-38, 2014.

● Sadeghi, M., Sadeghi, A., Saidi, M.H., Buoyancy Effects on Gaseous Slip Flow in a Vertical Rectangular Microchannel, Microfluidics and Nanofluidics, No. 16, pp. 207- 214, 2014.

● Hanafizadeh, P., Rafiee, A.H., Saidi, M.H., Experimental Investigation of Characteristic Curve for Gas –Lift pump, Journal of Petroleum Science and Engineering, Vol. 116, pp. 19-27, 2014.

● Sadeghi, M., Sadeghi, A., Saidi, M.H., Gaseus Slip-Flow Mixed Convection Through Ordered Microcylinder, AIAA Journal of Thermophysics and Heat Transfer, Vol. 28, No. 1, pp. 105- 117, 2014.2

● Vakili, M., Sadeghi, A., Saidi, M.H., Pressure Effects on Electroosmotic Flow of Power-law Fluids in Rectangular Microchannels, Journal of Theoretical and Computational Fluid Dynamics, Vol. 28, No. 132, pp. 409- 426, 2014.

● Mohammadi, M., Taslimifar, M., Saidi, M.H., Shafiee, M.B., Afshin, H., Hannani, S. K., Ferrofluidic Open Loop Pulsating Heat Pipes: Efficient Candidates for Thermal Management of Electronics, Journal of Experimental Heat Transfer, Vol. 27, pp. 296- 312, 2014

● Abianeh, M.H. J., Saidi, M.H., Aghanajafi, S., Experimental Investigation of Aqueous LiBr Solution Absorber Bundle with Horizontal Elliptical Tubes, HVAC&R Research, Vol. 20, pp. 251- 263, 2014

● Mohammadi, M., Taslimifar, M., Haghayegh, S., Hannani, S.K., Shafiee, M.B., Saidi, M.H., Afshin, H., Open Loop Pulsating Heat Pipes Charged with Magnetic Nano – fluids: Powerful Candidates for Future Electronic Coolers, Journal of Nanoscale and Microscale Thermophysical Engineering, Vol. 18, pp. 18- 37, 2014

● Yavari, H., Sadeghi, A., Saidi, M.H., Chakraborty, S., Temperature Rise in Electroosmotic Flow of Typical Non- Newtonian Biofluids Through Rectangular Microchannels, Journal of Heat Transfer- Transactions of the ASME, Vol. 136, pp. 1- 11, 2014

● Zabetian, M., Saidi, M.H., Saidi, M.S., Shafiee, M.B., Modeling of Laser Thermal and Hydraulic Effects on a Dilute Suspension of Micro- Particles in Water, Journal of Mechanical Science and Technology, Vol. 28, No. 3, pp. 1017- 1026, 2014

● Sadeghi, A., Amini, Y., Saidi, M.H., Chakraborty, S., Numerical Modeling of Surface Reaction Kinetics in Electrokinetically Actuated Microfluidic Devices, Analytica Chimica Acta, Vol. 838, pp. 64-75, 2014.

● Vakili, M., Saidi, M.H., Sadeghi, A., Thermal Transport Characteristics Pertinent to Electrokinetic Flow of Power-law Fluids in Rectangular Microchannels, International Journal of Thermal Sciences, Vol. 79, pp. 76-89, 2014

● Zabetian, M., Saidi, M.S., Shafiee, M.B., Saidi, M.H., Separation of Microparticles Suspended in a Minichannel Using Laser Radiation Pressure, Applied Optics, Vol. 52, No. 20, pp. 4950- 4958, 2013

● Chitsaz, I., Saidi, M.H., Mozafari, A.A., Haji alimohammadi, A. R., Experimental and Numerical Investigation on the Jet Characteristics of Spark Ignition Direct Injection Gaseous Injector, Journal of Applied Enegy, Vol. 105, pp. 8-16, 2013

● Jahanbakhshi, A.R., Saidi, M.H., Ghahremani, A.R., Numerical Modeling of Pulse Tube Refrigerator and Sensitivity Analysis of Simulation, HVAC&R Research, Vol. 19, pp. 242-256, 2013.

● Abianeh, M.H. J., Saidi, M.H., Laminar Falling Film Flow of Aqueous Li-Br Solution, International Journal of Fluid Mechanics Research, Vol. 20, No. 4, pp. 1-20, 2013

● Zabetian, Shafiee, M.B., Saidi, M.H., Saidi, M.S., Rouhani, R., A New Experimental Approach to Investigate the Induced Force and Velocity Fields on a Particulate Manipulation Mechanism, Scientia Iranica, Vol. 21, No. 2, pp. 1- 29, 2013

● Sadeghi, A., Kazemi, Y., Saidi, M.H., Joule Heating Effects in Elektrokinetically Driven Flow Through Rectangular Microchannels: An Analytical Approach, Journal of Nanoscale and Microscale Thermophysical Engineering, Vol. 17, pp. 173- 193, 2013

● Sadeghi, A., Veisi, H., Saidi, M.H., Mozafari, A.A., Electroosmotic Flow of Viscoelastic Fluids Through a Slit Microchannel with a Step Change in Wall Temperature, Journal of Heat Transfer – Transactions of the ASME, Vol. 135, No. 2, pp. 1- 12, 2013

● Sadeghi, A., Baghani,M., Saidi, M.H., Gaseous Slip Flow of Forced Convection Through Ordered Micro Cylinders, Microfluidics and Nanofluidics, Vol. 15, pp. 73- 85, 2013.

● Taslimifar, M., Mohammadi, M., Afshin, H., Saidi, M.H., Shafiee, M.B., Overall Thermal Performance of Ferrofluidic Open Loop Pulsating Heat Pipes: An Experimental Approach, International Journal of Thermal Sciences, Vol. 65, pp. 234- 241, 2012

● Yavari, H., Sadeghi, A., Saidi, M.H., Chakraborty, S., Combined Influences of Viscous Dissipation, Nonuniform Joule Heating and Variable Thermophysical Properties on Convective Heat Transfer in Microtubes, International Journal of Heat and Mass Transfer, Vol. 55, pp. 762- 772, 2012

● Hatami, Z., Saidi, M.H., Mohammadian, M., Aghanajafi, S., Optimization of Solar Collector Surface in Solar Desiccant Wheel Cycle, Energy and Buildings, Vol. 45, pp. 197- 201, 2012

● Ghanbarzadeh, S., Hanafizadeh, P., Saidi, M.H., Intelligent-Based Gas-Liquid Two Phase Flow Regime Recognition, Journal of Fluids Engineering- Transactions of the ASME, Vol. 134, No. 6, pp. 1-10, 2012

● Sadeghi, A., Veisi, H., Saidi, M.H., Chakraborty, S., Graetz Problem Extended to Mixed Electroosmotically and Pressure Driven Flow, AIAA- Journal of Thermophysics and Heat Transfer, Vol. 26, No. 1, pp. 123- 133, 2012

● Sadeghi, A., Saidi, M.H., Veisi, H., Fattahi, M., Thermally Driven Electroosmotic Flow of Power–law Fluids in a Parallel Plate Microchannel, International Journal of Thermal Sciences, Vol. 61, pp. 106- 117, 2012

● Ghaebi, H., Karimkashi, S., Saidi, M.H., Integration of an Absorption Chiller in a Total CHP Site for Utilizing Its Cooling Production Potential Based on R-curve Concept, International Journal of Refrigeration- Revue Internationale Du Froid, Vol. 35, pp. 1384-1392, 2012.

● Yavari, H., Sadeghi, A., Saidi, M.H., Hydrodynamic and Thermal Characteristics of Combined Electroosmotic and Pressure Driven Flow in a Microchannel, Journal of Heat Transfer- Transactions of the ASME, Vol. 134, No. 10, pp. 1-10, 2012.

● Firouzfar, E., Soltanieh, M., Noei, S.H., Saidi, M.H., Investigation of Heat Pipe Heat Exchanger Effectiveness and Energy Saving in Air Conditioning Systems Using Silver Nanofluids, International, Journal of Environmental Science and Technology, Vol. 9, No. 1, pp. 1- 8, 2012.

● Babaie, A., Saidi, M.H., Sadeghi, A., Heat Transfer Characteristics of Mixed Electroosmotic and Pressure Driven Flow of Power-law Fluids in a Slit Microchannel, International Journal of Thermal Sciences, Vol. 53, pp. 71-79, 2012.

● Ghaebi, H., Saidi, M.H., Ahmadi, P., Exergoeconomic Optimization of a Tri-generation System for Heating, Cooling and Power Production Purpose Based on TRR Method and Using Evolutionary Algorithm, Journal of Applied Thermal Engineering, Vol. 36, pp. 113-125, 2012.

● Sajadi, B., Saidi, M.H., Pumping Effect of Bubble Growth and Collapse in Microchannels: ThermoHydraulic Modeling, Scientia Iranica, Vol. 19, No. 3, pp. 431-436, 2012.

● Babaie, A., Saidi, M.H., Sadeghi, A., Electroosmotic Flow of Power-law Fluids with Temperature Dependent Properties, Journal of Non-Newtonian Fluid Mechanics, Vol. 185-186, pp. 49-57, 2012.

● Vakili, M., Sadeghi, A., Saidi, M.H., Mozafari, A.A., Electrokinetically Driven Fluidic Transport of Power-law Fluids Flow of Power-law Fluids in Rectangular Microchannels, Journal of Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 414, pp. 440-456, 2012.

● Ghahremani, A.R., Saidi M.H., Ebrahimian, M., Simultaneous Analytical Solution of the Complete System of Double Inlet Pulse Tube Refrigerator, AIAA Journal of Thermophysics and Heat Transfer, Vol. 26, No. 2, pp. 337-344, 2012.

● Hanafizadeh, P., Ghanbarzadeh, S., Saidi, M.H., Visual Technique for Detection of Gas-Liquid Two Phase Flow Regime in the Airlift Pump, Journal of Petroleum Science and Engineering, Vol. 75, No. 3, pp. 327-335, 2011.

● Saidi, M.H., Sajadi, B., Molaeimanesh, G. R., The Effect of Source Motion on Containment Distribution in the Cleanrooms, Energy and Buildings, Vol. 43, pp. 966-4970, 2011.

● Chitsaz, I., Saidi, M.H., Mozafari, A.A., Semi Analytical Solution to Transient Start of Under-Expanded Turbulent Jet, Journal of Fluids Engineering- Transactions of the ASME, Vol. 133, No. 9, pp. 1-8, 2011.

● Firouzfar, E., Soltanieh, M., Noei, S.H., Saidi, M.H., Application of the Heat Pipe Heat Exchanger in Heating, Ventilation and Air Conditioning (HVAC) Systems, Journal of Scientific Research and Essays, Vol. 6, No. 9, pp. 1900- 1908, 2011.

● Ahmadi, P., Bargegareavval H., Ghaffarizadeh, A.R., Saidi, M.H., Thermo-economic-environmental Multi_Objective Optimization of a Gas Turbine Power with Preheater Using Evolutionary Algorithm, International Journal of Energy Research, Vol. 35, pp. 389-403, 2011.

● Sadeghi, A., Salarieh, H., Saidi, M.H., Mozafari, A.A., Effects of Corrugated Roughness on Gaseous Slip Flow Forced Convection in Microtubes, AIAA Journal of Thermophysics and Heat Transfer, Vol. 25, No. 2pp. 262- 271, 2011.

● Sajadi, B., Saidi, M.H., Mohebbian, A., Numerical Investigation of the Swirling Air Diffuser: Parametric Study and Optimization, Energy and Buildings, Vol. 43, No. 6, pp. 1329-1333, 2011.

● Jafarian, A., Roshanghalb, F., Saidi, M.H., Imanimehr, F., Comparative Investigation of Low and High Frequency Pulse Tube Regenerators, Scientia Iranica, Vol. 18, No. 2, pp. 205-212, 2011.

● Firouzfar, E., Soltanieh, M., Noei, S.H., Saidi, M.H., Energy Saving in HVAC Systems Using Nanofluid, Journal of Applied Thermal Engineering, Vol. 31, No. 8, pp. 1543- 1545, 2011.

● Saidi, M.H., Sajadi, B., Sayyadi, P., Energy Consumption Criteria and Labeling Program of Wet Cooling Towers in Iran, Energy and Buildings, Vol. 43, No. 43, pp. 2712-2717, 2011.

● Hanafizadeh, P., Zamiri, A., Saidi, M.H., Effect of Step Geometry on the Performance of the Airlift Pump, International Journal of Fluid Mechanics Research, Vol. 35, No. 5, pp. 387-408, 2011.

● Hanafizadeh, P., Ghanbarzadeh, S., Saidi, M.H., Exergy Analysis of Airlift Systems: Experimental Approach, International Journal of Exergy, Vol. 8, No. 4, pp. 407-424, 2011.

● Hanafizadeh, P., Sajadi, B., Saidi, M.H., Innovative Semi Analytical Methodology to Predict Automobile Body Temperature Distribution in the Curing Ovens, Journal of Heat Transfer Engineering, Vol. 33, No. 2, pp. 1-9, 2011.

● Ghahremani, A.R., Saidi M.H., Jahanbakhshi, R., Roshanghalb, F., Performance Analysis and Optimization of High Capacity Pulse Tube Refrigerator, Journal of Cryogenics, Vol. 51, No. 4, pp. 173-179, 2011.

● Sadeghi, A., Yavari, H., Saidi, M.H., Chakraborty, S., Mixed Electroosmotically and Pressure Driven Flow with Temperature Dependent Properties, AIAA Journal of Thermophysics and Heat Transfer, Vol. 25, No. 3, pp. 4232- 442, 2011.

● Sadeghi, A., Fattahi, M., Saidi, M.H., An Approximate Analytical Solution for Electroosmotic Flow of Power-law Fluids in a Planar Microchannel, Journal of Heat Transfer- Transactions of the ASME, Vol. 133, No. 9, pp. 1-10, 2011.

● Hanafizadeh, P., Saidi, M.H., Nouri Gheimasi, A., Ghanbarzadeh, S., Experimental Investigation of Air-Water Two Phase Flow Regimes in Vertical Mini Pipe, Scientia Iranica, Vol. 18, No. 4, pp. 923-929, 2011.

● Ghazi, R., Saidi, M.S., Saidi, M.H., Numerical Study of Enhanced Heat Transfer by Coupling Natural and Electro-Convection in a Horizontal Enclosure, Journal of Enhanced Heat Transfer, Vol. 18, No. 6, pp. 503-511, 2011.

● Sadeghi, A., Saidi, M.H., Mozafari, A.A., Heat Transfer Due to Electroosmotic Flow of Viscoelastic Fluids in a Slit Microchannel, International Journal of Heat and Mass Transfer, Vol. 54, pp. 4069- 4077, 2011.

● Babaie, A., Sadeghi, A., Saidi, M.H., Combined Electroosmotically and Pressure Driven Flow of Power-law Fluids in a Slit Microchannel, Journal of Non-Newtonian Fluid Mechanics, Vol. 166, pp. 792-798, 2011.

● Hanafizadeh, P., Saidi, M.H., Karimi, A., Zamiri, A., Effect of Bubble Size and Angle of Tapering Upriser Pipe on the Performance of Airlift Pumps, Journal of Particulate Science and Technology, Vol. 28, No. 4, pp. 332-347, 2010.

● Sadeghi, A., Asgarshmsi, A., Saidi, M.H., Thermodynamic Analysis of Slip Flow Forced Convection through a Microannulus, AIAA Journal of Thermophysics and Heat Transfer, Vol. 24, No. 4, pp. 785-795, 2010.

● Esmaeelisani, A.R., Saidi, M.H., Neyestani, J., Experimental Prediction of Nusselt Number and Coolant Heat Transfer Coefficient in Compact Heat Exchanger Performed with E-NTU Method, Journal of Engine Research, Vol. 18, pp. 62-70, 2010.

● Saidi M.H., Aghanajafi, S., Mohammadian, M., Analysis of Dehumidification Effects on Cooling Capacity of an Evaporative Cooler, Journal of Thermal Science and Technology, Vol. 5, No. 12, pp. 151-164, 2010.

● Sadeghi, A., Saidi, M.H., Second Law Analysis of Slip Flow Forced Convection Through a Parallel Plate Microchannel, Journal of Nanoscale and Microscale Thermophysical Engineering, Vol. 14, No. 4, pp. 209- 228, 2010.

● Sadeghi, A., Saidi, M.H., Viscous Dissipation and Rarefaction Effects on Laminar Forced Convection in Microchannels, Journal of Heat Transfer- Transactions of the ASME, Vol. 132, No. 7, pp. 1-12, 2010.

● Irani R. A., Saidi, M.S., Saidi, M.H., Shafiee, M.B., Two-Dimensional Numerical Investigation of a Microcombustor, Scientia Iranica, Vol. 10, No. 3, pp. 186-193, 2010.

● Hanafizadeh, P., Saidi, M.H., Darbandi, M., Kebriaei, A., Numerical Simulation of Two-Phase Flow in Airlift Pumps Using the Physical Influence Technique, Progress in Computational Fluid Dynamics, Vol. 10, No. 3, pp. 186-193, 2010.

● Sadeghi, A., Saidi, M.H., Viscous Dissipation Effects on Thermal Transport Characteristics of Combined Pressure and Electroosmotically Driven flow in Microchannels, International Journal of Heat and Mass Transfer, Vol. 53, pp. 3782- 3791, 2010.

● Jafarkarimi H., Saidi, M.H., Heat Transfer and Energy Analysis of a Pusher Type Reheating Furnace Using Oxygen Enhanced Air for Combustion, Journal of Iron and Steel Research International, Vol. 17, No. 4, pp. 12-17, 2010.

● Ashouri, M., Ebrahimi, B., Shafiee, M.B., Saidi, M.H., Saidi, M.S., Correlation for Nusselt Number in Pure Magnetic Convection Ferrofluid Flow, Journal of Magnetism and Magnetic Materials, Vol. 332, No. 22, pp. 3607-3613, 2010.

● Saidi, M.H., Tayebi Rahni, M., Asadi, B., Ahmadi, G., Computational Simulation of Maragoni Convection Under Microgravity Condition, Scientia Iranica, Vol. 16, No. 6, pp. 513-524, 2009.

● Bohlouli, A., Borghaei, S.M., Saidi, M.H., A New Method in Two Phase Flow Modeling of Non Uniform Grid, Scientia Iranica, Vol. 16, No. 5, pp. 425-439, 2009.

● Asgari, O., Saidi, M.H., Approximate Method of Determining the Optimum Cross Section of Microchannel Heat Sink, Journal of Mechanical Science and Technology, Vol. 23, No. 12, pp. 3448-3458, 2009.

● Dehghani, S. R., Saidi, M.H., Mozafari, A. A., Ghafourian, A., Particle Trajectory in a Bidirectional Vortex Flow, Journal of Particulate Science and Technology, Vol. 16, No. 4, pp. 313-331, 2009.

● Asgari, O., Saidi, M.H., Numerical Investigation of Fluid Flow and Heat Transfer Characteristics in Parallel Flow Single Layer Microchannels, Scientia Iranica, Vol. 16, No. 4, pp. 313-331, 2009.

● Asadi, B., Saidi, M.H., Tayebi Rahni, M., Ahmadi, G., Computational Simulation of Hydrodynamic Convection in Rising Bubble Under Microgravity Condition, International Journal of Engineering, Vol. 22, No. 3, pp. 295-305, 2009.

● Kargar, M., Saidi, M.H., Ghafourian, A., Heat Transfer Phenomena in a Vortex Engine, AIAA Journal of Thermophysics and Heat Transfer, Vol. 23, No. 4, pp. 847- 852, 2009.

● Najafi, A.F., Saemi, S., Saidi, M.H., Numerical Simulation of Vortex Engine Flow Field: One Phase and Two Phase, Journal of Thermal Sciences, Vol. 18, pp. 226- 234, 2009.

● Moradian, A., Saidi, M.H., Electrohydrodynamically Enhanced Nucleation Phenomena: A Theoretical Study, Journal of Enhanced Heat Transfer, Vol. 15, No. 1, pp. 1-15, 2008.

● Jafarian, A., Saidi, M.H., Sarikhani, N., Hannani, S.K., Second Law Based Analysis of Flow in the Regenerator of Pulse Tube Refrigerators, International Communication in Heat and Mass Transfer, No. 35, pp. 1204-1210, 2008.

● Jafarian, A., Saidi, M.H., Hannani, S.K., Second Law Based Modeling to Optimum Design of High Capacity Pulse Tube Refrigerators, International Journal of Refrigeration-Revue Internationale Du Froid, Vol. 1, No. 12, pp1-12, 2008.

● Jafarian, A., Saidi, M.H., Hannani, S.K., Second law Based Analysis of Flow in the Regenerator of Pulse Tube Refrigerators, International Journal of Engineering-Aransactions A Basics, Vol. 21, No. 2, pp. 179-192, 2008.

● Saidi, M.H., Montazeri, A., Second Law Analysis of a Magnetohydrodynamic Plasma Generator, Journal of Energy, Vol. 32, pp. 1603–1616, 2007.

● Saidi, M.H., Khiabani, R.H., Forced Convective Heat Transfer in Parallel Flow Multi-Layer Microchannels, Transactions of the ASME Journal of Heat Transfer, Vol. 129, pp. 1230-1236, 2007.

● Ghafourian, A., Saidi, M.H., Jahangirian, S., Abarham, M., Effect of Vortex Flow on Heat Transfer to Combustion Chamber Wall, ASME Journal of Engineering for Gas Turbine and Power, Vol. 129, pp. 622 – 624, 2007.

● Ramezani-Zadeh, M., Taeibi-Rahni, M., Saidi, M.H., Investigation of Density Ratio Effects on Normally Injected Cold Jets into a Hot Cross Flow, Journal of Arch. Appl. Mech., Vol. 77, pp. 835 – 847, 2007.

● Ramezani-Zadeh, M., Saidi, M.H., Taeibi-Rahni, M., Computational Simulation of Two-Dimensional Turbulent Film Cooling Using LES Approach and Considering Density Ratio Effects, Mech. & Aerospace Eng. Journal, Vol. 3, No. 1, pp. 91-103, 2007.

● Saidi, M.H., Vaziri, S., Hybrid Desiccant Cooling Systems, ASHRAE Journal, pp. 44 – 49, 2007.

● Ramezani-Zadeh, M., Taeibi-Rahni, M., Saidi, M.H., Large Eddy Simulation of Multiple Jets into Cross Flow, Scientia Iranica, Vol. 14, No. 3, pp. 240-250, 2007.

● Kabiri–Samani, A.R., Borghei, S.M., Saidi, M.H., Fluctuation of Air- Water Two – Phase Flow in Horizontal and Inclined Water Pipelines, ASME Journal of Fluids Engineering, Vol. 129, pp. 1- 14, 2007.

● Majidian, A., Saidi, M.H., Comparison of Fuzzy Logic and Neural Network in Life Prediction of Boiler Tubes, Int. Journal of Fatigue, Vol. 29, pp. 489 - 498, 2007.

● Kabiri–Samani, A.R., Borghei, S.M., Saidi, M.H., Fluctuation of Air- Water Two – Phase Flow in Horizontal and Inclined Water Pipelines, Scientia Iranica, Vol. 13, No. 2. pp. 174-186, 2006.

● Esfandiari Nia, F., van Passen, D., Saidi, M.H., Modeling and Simulation of Desiccant Wheel for Air Conditioning, Energy and Buildings, Vol. 38, pp. 1230 -1239, 2006.

● Saidi, M.H., Abbasi, A., Ehyaei M.A., Exergetic Optimization of a PEM Fuel Cell for Domestic Hot Water Heater, ASME Journal of Fuel Cell science and Technology, Vol. 2, pp. 284 289, 2005.

● Saidi, M.H., Ehyaei, M.A., Abbasi, A., Optimization of a Combined Heat and Power PEFC by Exergy Analysis, Journal of Power Sources, Vol. 143, pp. 179 - 184, 2005.

● Najafi, A.F., Saidi, M.H., Sadeghipour, M.S., Souhar, M., Numerical Analysis of Turbulent Swirling Decay Pipe Flow, Int. Comm. Heat Mass Transfer, Vol. 32, pp. 627 - 638, 2005.

● Najafi, A.F., Saidi, M.H., Sadeghipour, M.S., Souhar, M., Boundary Layer Solution for the Turbulent Swirling Decay Flow through a Fixed Pipe: SBR at the Inlet, International Journal of Engineering Science, Vol. 43, pp. 107 - 120, 2005.

● Jani, S., Saidi, M.H., Mozafari, A.A., Second Law Based Optimization of Falling Film Single Tube Absorption Generator, Journal of Heat Transfer- Transactions of the ASME, Vol. 126, pp. 708 - 712. 2004.

● Jani, S., Saidi, M.H., Mozafari, A.A., and Heydari, A., Modeling Heat and Mass Transfer in Falling Film Absorption Generators, Scientia Iranica, Vol. 11, No. 1-2, pp. 81-91, 2004.

● Saidi, M.H., Valipour, M.S., Experimental Modeling of Vortex Tube Refrigerator, Journal of Applied Thermal Engineering, Vol. 23, pp. 1971-1980, 2003.

● Saidi, M.H., Moradian, A., Availability Analysis for Heterogeneous Nucleation in a Uniform Electric Field, International Journal of Engineering: Transaction A: Basics, Vol. 16, No. 2, pp. 205- 216, June 2003.

● Jani, M., Saidi, M.H., Mozafari, A.A., Tube Bundle Heat and Mass Transfer Characteristics in Falling Film Absorption Generator, Int. Comm. Heat Mass Transfer, Vol. 30, No. 4, 2003.

● Saidi, M.H., Moradian, A., Availability Analysis for the Homogeneous Nucleation of a Single Bubble Under Electrohydvodynamic, Int. Comm. Heat Mass Transfer, No.6, Vol. 29, 2002.

● Saidi, M.H., Ohadi, M., and Souhar, M., Enhanced Pool Boiling of R-123 Refrigerant on Two Selected Tubes, Journal of Applied Thermal Engineering, Vol. 19, pp. 885 – 895, 1999.

● Saidi, M.H., Yazdi, M.R.A., Exergy Model of a Vortex Tube System with Experimental Results, Energy, Vol. 24, No. 7, pp. 625-632, 1999.

● Darabi, M., Salehi, M., Saidi, M.H., Ohadi, M.M., Review of. Boiling Heat Transfer corrlations in Smooth and Enhanced Tubes, ASHRAE Transactions, CH-81-16-NO.3, 1995.

Last update: May 5, 2024

ISC Journals

● Abadshapoori, M.H., Saidi, M.H., Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries, Amirkabir Journal of Mechanical Engineering, Vol. 49, No. 3, pp. 567-580, 2017, (In Persian).

● Saeedan, M., Saidi, M.H., Fajri, H.R., Numerical evaluation of engine performance and emission characteristics of rapeseed oil and its blends in diesel engines, Modares Mechanical Engineering, Vol. 17, pp. 277-284, 2017, (In Persian).

● Keramati, H., Saidi, M.H., Zabetian M., Experimental analysis on stabilization of zirconia microparticles suspension using nanoparticle halo mechanism, Modares Mechanical Engineering, Vol. 15 (5, 2015, (In Persian).

● Reshadi, M., Saidi, M.H., Analytical study of cross stream diffusion for combined electroosmotic and Poiseuille flows in rectangular microchannels: inclusion of EDL effect, Modares Mechanical Engineering, Vol. 15 (4, 2015, (In Persian).

● Naghizadeh, M.M., Ghahremani, A., Saidi, M.H., Numerical simulation of spray characteristics of bio-ethanol and its blend with gasoline in a direct injection combustion chamber, Modares Mechanical Engineering, Vol. 15 (4), 2015, (In Persian).

● Niroomand, R., Saidi, M.H., Hannani S.K., Numerical Simulation of a Compact Radiator with Offset Strip Fins, Modares Mechanical Engineering, Vol. 15, No. 2, pp. 1-12, 2014, (In Persian).

● Khaksar-Haghani, S., Saidi, M.H., Marvi, M., Evaluation of Reliability Analysis in Heat Recovery Steam Generator Considering Operation, Maintenance and Wearing Conditions, Journal of Scientific Research of Sharif, 2014, (In Persian).

● Haghayegh, S., Saidi, M.H., Afshin, H., Shafiee, M.B., Adibnia, A., Experimental Investigation of Pulsating Heat Pipes and the Effect of the Length of Evaporating Section on Its Performance, Journal of Tarbiat Modarres, Vol. 13, No. 15, 2013, (In Persian).

● Niroomand, R., Saidi, M.H., Energy and Exergy Analysis of Power Generation System of a Marine Diesel Engine, Journal of Modelling in Engineering, Vol. 9, No. 25, 2011, (In Persian).

● Shams, H., Hanafizadeh, P., Saidi, M.H., Numeriacl Investigation of Effective Operating Parameters of Airlift Pumps, Journal of Scientific Research of Sharif, Vol. 26, No. 1, pp. 111-118, 2010 (In Persian).

● Hanafizadeh, P., Saidi, M.H., Numeriacl-Analytical Simulation of Two Phase Gas-Liquid Flow in a Vertical Pipeline, Mech. & Aerospace Eng. Journal, Vol. 4, No. 3, pp. 33-43, 2008, (In Persian).

● Saidi, M.H., Sadjadi, B., Safaei, H., Pirouzpanah, S., Thermohydraulic Modeling of Phase Change Micropump, Journal of Scientific Research of Sharif, Vol. 24, No. 42, pp. 41-47, 2008, (In Persian).

● Kabiri Samani, A.R., Borghei, S.M., Saidi, M.H., Experimental Investigation of Pressure Fluctuations in Two Phase Transient Flow of Air - Water in Closed Conduits, Journal of Esteghlal, Vol. 24, No. 2, pp. 69-86, 2006, (In Persian).

● Kabiri Samani, A.R., Borghei, S.M., Saidi, M.H., Flow Pattern of Two Phase Air - Water Flow in Horizontal Conduits with Low Inclination Angle, Journal of Scientific Research of Sharif, Vol. 22, No. 35, pp. 13- 22, 2004, (In Persian).

● Saidi, M.H., Vosoughi, G. R., Saffarian, M., Design of Idle Speed Control for Spark Ignition Engines Using Torque Predictive Model, Journal of Engine Research, Vol. 6, pp. 2- 9, 2005. (In Persian).

● Vosoughi, G. R, Saidi, M.H., Miri, S.M., Air Fuel Ratio Control of Internal Combustion Engines Using Fuzzy, Integral and Fuzzy-Integral Control Techniques, Journal of Engine Research, Vol. 7, pp. 2- 15, 2005, (In Persian).

● Saidi, M.H., Thermo-Hydraulic Modelling of Pulse Tube Refrigerators, Journal of Air conditioning and Refrigeration, Vol. 2, No. 9, 2005, (In Persian).

● Saidi, M.H., Faghih, A.R., Kouhi-Kamali, R., A CAE Modeling for Vehicle Air Conditioning System Design, Journal of Scientific Research of Sharif, Vol. 26, pp. 43- 49, 2004, (In Persian).

● Saidi, M.H., Kouhi-Kamali, R., Faghih, A.R., A CAE Modeling for Thermal Performance of Vehicle Compartment, Journal of Scientific Research of Sharif, Vol. 21, No. 29, pp. 7-12, 2004, (In Persian).

● Hannani, S.K., Kakaei, A.H., Saidi, M.H., Valipour, S., Energy Consumption of a Household Oven: Thermodynamic Modeling, Journal of Scientific Research of Sharif, Vol. 21, No. 26, pp. 19-25, 2004, (In Persian).

● Saidi, M.H., Saleh, M. Kakaei, A.H., Farahani, M.E., Evaporative Cooler Performance Optimization-Energy Consumption Reduction, Journal of Scientific Research of Bargh, No. 23, 76-86, 1997, (In Persian).

Last update: April 21, 2021

Conference Papers

● Farizan, A., Asadi, M., Abbassi, A., Saidi, M.H., Zabetian, M., Eslami, J., Experimental investigation of the effect of exhaust location on airflow patterns in a small scale room,28th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2020), Amirkabir University, Tehran, Iran, May 27-29, 2020, (In Persian).

● Farizan, A., Abbassi, A., Saidi, M.H., Zabetian, M., Eslami, J., Numerical investigation of the effect of the motion of a nurse on airflow patterns in a protective isolation room, 28th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2020), Amirkabir University, Tehran, Iran, May 27-29, 2020, (In Persian).

● Alishiri, M., Saidi, M.H., Investigation of the optimal concentrations of Iron oxide-multiwalled carbon nanotubes nanofluid based on the non-dominated sorting genetic algorithm-II, 28th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2020), Amirkabir University, Tehran, Iran, May 27-29, 2020, (In Persian).

● Mirzabaghi, F., Saidi, M.H., Aghanajafi, S., Cooling optimization in a non-uniform microtube with structured surfaces under (developing) pulsating and incompressible flow, 28th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2020), Amirkabir University, Tehran, Iran, May 27-29, 2020, (In Persian).

● Mirzabaghi, F., Saidi, M.H., Aghanajafi, C., Cooling optimization of incompressible pulsating flow in a non-uniformed micro tube with inner structured surfaces, 28th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2020), Amirkabir University, Tehran, Iran, May 27-29, 2020, (In Persian).

● Asadi, M., Saidi, M.H., Zabetian, M., Development and Evaluation of a stereoscopic-PIV Reconstruction Code, 28th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2020), Amirkabir University, Tehran, Iran, May 27-29, 2020, (In Persian).

● Khedmati, A.R., Saidi, M.H., Optimal Determination of Thermal Energy Storage System for the Technique of Compressed Air Energy Storage, 28th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2020), Amirkabir University, Tehran, Iran, May 27-29, 2020, (In Persian).

● Khademi, A. Saidi, M.H., Darbandi, M., Schneider, G.E., Numerical Study of Bacterial Influences Caused by Patient Breathing, Proceedings of the 6th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT'19), Ottawa, Canada, June 18-19, 2019.

● Khademi, A. Saidi, M.H., Darbandi, M., Numerical Investigation of Particle Accumulation Effect Due to Human Respiration, 27th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2019), April 28-30, 2019.

● Nikounazari, M., Saidi, M.H., Zehni, A., Compressor matching investigation for M15GS engine with using 1D-3D model in full-load condition, 27th Annual Conference of Iranian Society of Mechanical Engineers (ISME2019), April 28-30, 2019. (In Persian).

● Ahmadi, N., Saidi, M.H., Hakaki Fard, A., Battery cooling by implementing numerical simulation and lumped capacitance in integrating cooling model with thermal- electrical model, International Conference on Modern Power Trains, 2019, (In Persian).

● Karbalaei Mirza, F., Abbaspour, M., Saidi, M.H., Techno-economic and environmental analysis of hybrid desalination coupled with a back pressure and condensing combined cycle power plant, Case study: Bandaraabas, The 5th International Conference on Technology and Energy Management, February 20, 2019 (In Persian).

● Mohammadzadeh, A., Saidi, M.H., Numerical Study on the Effect of Inlet Channel Angle on electrokinetic Instabilities, 27th Annual Conference of Iranian Society of Mechanical Engineers (ISME2019), April 28-30, 2019.

● Akbari, A., Saidi, M.H., Experimental Study of Thermal Performance of Pulsating Heat Pipe Filled with Hybrid Nanofluids, 27th Annual Conference of Iranian Society of Mechanical Engineers (ISME2019), April 28-30, 2019.

● Akbari, A., Saidi, M.H., Experimental Investigation of Startup Performance of a Nanofluid Pulsating Heat Pipe, Proceedings of ISME 2018, 26th International Conference on Mechanical Engineering (ISME2018), Semnan, Iran, April 24-26, 2018 (in Persian).

● Akbari, A., Saidi, M.H., Experimental Investigation of the Initiation Performance of Pulsating Heat Pipe Filled with Nanofluids, 26th Annual Conference of Iranian Society of Mechanical Engineers (ISME2018), April 24-26, 2018 (In Persian).

● Saidi, M.H., Pourfarzan, A., Mohsenzadeh, M., Integration of Solar-Based Combined Cooling, Heating and Power and Phase Change Material in a Residential Building, 26th Annual International Conference of Mechanical Engineering – (ISME2018), University of Semnan, Iran, April 2018 (In Persian).

● Schneider, G.E., Ghafourizadeh, M., Darbandi, M., Saidi, M.H., Exhaust Soot Investigation in a JP Combustor Working at Various Wall Temperatures, AIAA Science and Technology Forum and Exposition 2018, SciTech-2018.

● Rabiei, P., Saidi, M.H., Implementation of Linear Parameter Varying system to investigate the impact of varying flow rate on the Lithium-ion batteries thermal management system performance, 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), April 16-18, 2018.

● Ashouri, M., Saidi, M.H., Three-Dimensional Simulation of Two-Stage GM-Type Pulse Tube Refrigerator with Double Inlet Valve, Proceedings of ISME 2017, 25th International Conference on Mechanical Engineering (ISME2017), Tehran, Iran, May 2-4, 2017 (in Persian).

● Akbari, A., Saidi, M.H., Experimental investigation of thermal performance of pulsating heat pipe with graphene/water nanofluid, 25th International Conference on Mechanical Engineering (ISME2017), Tehran, Iran, May 2-4, 2017 (in Persian).

● Kordkandi, M.A., Saidi, M.H., Investigation of water loss reduction in hybrid cooling towers, 25th International Conference on Mechanical Engineering (ISME2017), Tehran, Iran, May 2-4, 2017 (In Persian).

● Eslami, J., Abbasi, A., Saidi, M.H., Zabetian, M., Naseri, M.H., Fajri, H.R., Experimental investigation on airflow pattern for a small-scale ventilated room using particle image velocimetry method, 25th International Conference on Mechanical Engineering (ISME2017), Tehran, Iran, May 2-4, 2017 (In Persian).

● Kordkandi, M.A., Niroumand, R., Saidi, M.H., Investigating the effect of environmental conditions on the performance of wet cooling towers, 3rd National Conference on Air Conditioning and Heating and Refrigeration, Gazvin, Iran, March 1-3, 2018 (In Persian).

● Darbandi, M., Saidi, M.H., Ghafourizadeh, M., Barezban, M.B., Thermal Performance Study for the Oxy-Kerosene Flame to Achieve Higher Combustion Temperatures in Lower Oxygen Consumption, Paper No. FCCI 2018-1023, Proceedings of the Seventh Fuel and Combustion Conference of Iran, 8 pages, Sharif University of Technology, Tehran, Iran, Feb. 14-15, 2018, (In Persian).

● Darbandi, M., Ghafourizadeh, M., Saidi, M.H., Schneider, G.E., Detailed-Chemistry Study of Soot Nano-Aerosol Formation in a Stagnation-Point Reverse-Flow Combustor, the 55th AIAA Aerospace Sciences Meeting, SciTech-2017.

● Alipoor, A., Saidi, M.H., Effect of modular structure on hydrogen-air combustion characteristics in a novel micro combustor, 10th Mediterranean Combustion Symposium, 2017.

● Darbandi, M., Ghafourizadeh, M., Saidi, M.H., Schneider, G.E., Numerical Study of Soot Nano-Aerosol Formation in a JP Combustor Embedded with a Mini-Scale Air-Distributor, 23rd AIAA Computational Fluid Dynamics Conference, June 5-9, 2017.

● Darbandi, M., Ghafourizadeh, M., Saidi, M.H., Schneider, G.E., Analysis of Smoke-Aerosol Formation in Pressurized Turbulent Kerosene/Air Flames Using Different Soot Models, 47th AIAA Thermophysics Conference, June 5-9, 2017.

● Darbandi, M., Saidi, M.H., Ghafourizadeh, M., Schneider, G.E., Detailed-Chemistry Study of Soot Nano-Aerosol Formation in a Stagnation-Point Reverse-Flow Combustor, 55th AIAA Aerospace Sciences Meeting, January 9 - 13, 2017.

● Keramati, H., Zabetian, M., Saidi, M.H., Mozafari, A.A., Experimental Characterization of Stabilized Suspensions Caused by Formation of Nanoparticle Halos, ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2014), August 3–7, 2014.

● Moosavi, A., Saidi, M.H., Reshadi, M., Thickness Optimization of Polyurethane Floor Insulation Based on Analysis of the Heat Transfer in a Multi-Layer, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis (ESDA2014), June 25-27, 2014.

● Rouhani, M., Zabetian, M., Saidi, M.H., Saidi, M.S., Shafiee, M.B., An Experimental Study on the Stability and Homogeneity of a Dilute Dispersion of Micro-particles, Proceedings of the 8th International Conference on Multiphase Flow, ICMF 2013, Jeju, Korea, May 26 - 31, 2013.

● Taslimifar, M., Mohammadi, M., Saidi, M.H., Afshin, H., Shafiee, M.B., Hannani, S.K., Thermal Performance of an Open Loop Pulsating Heat Pipe with Ferrofluid (Magnetic Nano-Fluid), 3rdMicro/Nanoscale Heat & Mass ransfer, International Conference (MNHMT2012), Atlanta, Georgia, March 3-6 , 2012.

● Mohammadi, M., Taslimifar, M., M., Saidi, M.H., Afshin, H., Shafiee, M.B., Hannani, S.K., Experimental Investigation of an Open Loop Pulsating Heat Pipe Using Ferrofluid, 3rd Micro/Nanoscale Heat & Mass ransfer International Conference (MNHMT2012), Atlanta, Georgia, March 3-6, 2012.

● Zabetian, M., Saidi, M.H., Saidi, M.S., Shafiee, M.B., Laser induced flow in particulate media, Proceedings of the 7th International Conference on Computational Heat and Mass Transfer, Istabul, Turkey, 2011.

● Zabetian, M., Saidi, M.S., Shafiee, M.B., Saidi, M.H., Thermal Interaction of Laser Beam with Particulate Flow in Minichannels, Proceedings of the 9th International Conference on Nanochannels, Michrochannels and Minichannels (ICNMM2011), Canada, June 19-22, 2011.

● Chitsaz, I., Saidi, M.H., Mozafari, A.A., Numerical investigation of initial condition of high pressure underexpanded methane injection into still air, Proceedings of the 7th International Conference on Internal Combustion Engines, Tehran, Iran, November 2011.

● Saidi, M.H., Babaie, A., Sadeghi, A., Electroosmotic Flow of Power - law Fluids in a Cylindrical Microapillary, Proceedings of the ASME 2011 International Design Engineering Technical Conference/Computers and Information in Engineering, IDETC/CIE, Washington DC, USA, August, 29-31, 2011.

● Babaie, A., Sadeghi, A., Saidi, M.H., Thermal Transport Characteristics of Non-Newtonian Electroosmotic Flow in a Slit Microchannel, Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2011), June, 19-22, 2011.

● Ebrahimi, B., Ashouri, M., Shafiee, M.B., Saidi, M.S., Saidi, M.H., Laminar Natural Convection Flow Under Magnetic Field in Cavities Filled with Square Rods, Proceedings of 2010 International Conference on Fluid Dynamics and Thermodynamics Technologies, Singapore, June, 2010.

● Roshaghalb, F., Ghahremani, A.R., Jahanbakhshi, R., Saidi, M.H., Jafarian, D., A., Investigation on Operating Parameters of a Pulse Tube Using Real Gas Equation of State for Temperatures below 20 K, Proceedings of 23 rd International Conference on Engineering Cryogenics-ICMC2010, Wroctaw University of Technology, Poland, July 19-23, 2010.

● Ebrahimian, M., Ghahremani, A.R., Saidi, M.H., Simultaneous Analysis Solution of All Components of Double Inlet Pulse Tube Refrigerator, International Mechanical Engineering Congress and Exposition-IMECE2010, November 12-18, 2010.

● Karimi, A., Hanafizadeh, P., Saidi, M.H., Augmentation of Airlift Pump Performance in Step Geometry, 7th International Conference on Multiphase Flow (ICMF 2010), Tampa, Florida, USA, May 30-June 4, 2010.

● Aghakashi, V., Saidi, M.H., Ghafourian, A., Mozafari, A.A., Analysis of Temperature Distribution over a Gas Turbine Shaft Exposed to a Swirl Combustion Flue, International Heat Transfer Conference-IHTC14, Washington DC, USA, August, 2010.

● Shahsavari, S., Shafiee, M.B., Saidi, M.H., Numerical Analysis of a Thermo-pneumatic Micropump, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and International ASME Conference on Nanochannels, Microchannels, and Minichannels FEDSMICNMM2010, Montreal, Canada, August, 1-5, 2010.

● Sadeghi, A., Baghani, M., Saidi, M.H., Entropy Generation in Thermally developing Laminar Forced Convection Through a Slit Microchannel, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and International ASME Conference on Nanochannels, Microchannels, and Minichannels FEDSMICNMM2010, Montreal, Canada, August, 1-5, 2010.

● Sadeghi, A., Baghani, M., Saidi, M.H.,Second Law Analysis for Extended Graetz Problem Including Viscous Dissipation in Microtubes, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and International ASME Conference on Nanochannels, Microchannels, and Minichannels FEDSMICNMM2010, Canada, August 1-5, 2010.

● Hanafizadeh, P., Ghanbarzadeh, S., Nouri, G. A., Saidi, M.H., Experimental Investigation of Air – Water Two Phase Flow Regime in Vertical Mini Pipe, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and International ASME Conference on Nanochannels, Microchannels, and Minichannels FEDSMICNMM2010, Montreal, Canada, August, 1-5, 2010.

● Ghanbarzadeh, S., Hanafizadeh, P., Saidi, M.H., Bozorgmehri, Fuzzy Clustering of vertical Two Phase Flow Regimes Based on Image Processing Technique, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and International ASME Conference on Nanochannels, Microchannels, and Minichannels FEDSMICNMM2010, Montreal, Canada, August, 1-5, 2010.

● Ghanbarzadeh, S., Hanafizadeh, P., Saidi, M.H., Bozorgmehri, Intelligent Regime Recognition in Upward Vertical Gas –Liquid Two Phase Flow Using Neural Network Techniques, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and International ASME Conference on Nanochannels, Microchannels, and Minichannels FEDSMICNMM2010, Montreal, Canada, August, 1-5, 2010.

● Firouzfar, E., Soltanieh, M., Noei, H., Saidi, M.H., A Review on the Application of Heat Pipe Heat Exchangers for Energy Systems in HVAC Systems, 10th International Conference on Clean Energy ICCE-2010, Famagusta, N. Cyprus, Sept. 15-17, 2010.

● Ahmadi, P., Barzegar, A.H., Saidi, M.H., Dincer, E., Thermodynamic modeling of a SOFCGT with a Heat Recovery Steam Generator, 5th International Energy Symposium and Exhibition IEESE-5, Pamukkale University, Denizli, Turkey, June, 2010.

● Ghanbarzadeh, S., Hanafizadeh, P., Gholampour, P., Shams, H., Saidi, M.H., Improvement of Airlift Pump Performance Based on the Exergy Analysis, 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Ecole Polytechnique Federale De Lausanne, Swiss, June 14-17, 2010.

● Hanafizadeh, P., Khaghani, A., Shams, H., Saidi, M.H., Heat Recovery of Exhaust Gas in Automotive Paint Ovens, 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Ecole Polytechnique Federale De Lausanne, Swiss, June 14-17, 2010.

● Saidi, M.H., Karrabi, H., Bargegar, A.H., Asgarshamsi, A.A., Numerical Simulation of Turbulent Heat Transfer on a Rotating Disk with an Impinging Jet, ASME-10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2010), Istanbul, Yedit tape University, July 12-14, 2010.

● Gharemani, A.A., Roshaghalb, F., Jahanbakhshi, R., Saidi, M.H., Hannani, S.K., Performance Analysis and Optimization of High Capacity Pulse Tube Refrigerator, ASME-10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2010), Istanbul, Yedit tape University, July 12-14, 2010.

● Roshaghalb, F., Jahanbakhshi, R., Gharemani, A.A., Ahmadi, P., Saidi, M.H., Optimization of Pulse Tube Refrigerator Considering Prominent Operating Parameters Using Evolutionary Algorithms, 11th Cryogenics 2010, IIR International Conference, Bratilava, Oslowaki, April, 26-29, 2010.

● Jahanbakhshi, R., Gharemani, A.A., Roshaghalb, F., Saidi, M.H., Numerical Modeling of Pulse Tube Refrigerator and Sensitivity Analysis of Simulationm, 11th Cryogenics 2010, IIR International Conference, Bratilava, Oslowaki, April, 26-29, 2010.

● Babaie, A., Hanafizadeh, P., Saidi, M.H., Effect of Aeration on Water Discharge and Cavitation in Bottom Outlet, Proceedings of 7th International Conference on Multiphase Flow-ICMF 2010, Tampa, Florida, USA, May 30-June 4, 2010.

● Babaie, A., Hanafizadeh, P., Saidi, M.H., The Effect of Aeration on Cavitation and Hydrodynamic Forces acting on Slice Gates in Dam Bottom Outlets, Proceedings of 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, July 19-21, 2010.

● Eslami, J., Sajadi, B., Saidi, M.H., The Effect of Nurse Movement on the Operating Room Cleanness,CLIMA2010-10th REHVA Word Cogress: Sustainable Energy Use in Building, Antalya, Turkey, May 2010.

● Sajadi, B., Mohebian, A., Saidi, M.H., Parametric Study and Optimization of Swirl Air through Diffuser, CFDCLIMA2010-10th REHVA Word Cogress: Sustainable Energy Use in Building, Antalya, Turkey, May 2010.

● Saeedi, S.N., Kiaei, S.E., Sajadi, B., Zabetian, M., Saidi, M.H., Experimental Investigation of Indoor Airflow Using PIV Technique, CLIMA2010-10th REHVA Word Cogress: Sustainable Energy Use in Building, Antalya, Turkey, May 2010.

● Molaeimanesh, G.R., Sajadi, B., Saidi, M.H., The Effect of Source Motion on Contaminant Distribution in Cleanrooms, CLIMA2010-10th REHVA Word Cogress: Sustainable Energy Use in Building, Antalya, Turkey, May 2010.

● Sajadi, B., Saidi, M.H., Ahmadi, G., On the Effect of Surgical Luminaries on Operating Theatre Ventilation, CLIMA2010-10th REHVA Word Cogress: Sustainable Energy Use in Building, Antalya, Turkey, May 2010.

● Dehghani, S.R., Saidi, M.H., Mozafari, A.A., Ghafourian, A., Effect of Entrance Position on Particle Dispertion in Bidirectional Vortex Flow, FEDSM, Vancouver, Canada, November 2009.

● Dehghani, S.R., Mozafari, Saidi, M.H., A.A., Ghafourian, A., Analytical Solution of Chamber Effective Length in the Axial Engine, FEDSM, Vancouver, Canada, November 2009.

● Saidi, M.S., Saidi, M.H., Hanafizadeh, P., Sajadi, B., Transient Prediction of Automobile Body Temperature Distribution in the ED Paint Dryers: Analytical-Numerical Approach, Proceedings of the Fourth International Conference on Energy Research & Development, Kuwait, 2009.

● Saidi, M.H., Saidi, M.S., Hanafizadeh, P., Sajadi, B., Irani, R.A., Ventilation system design for automobile assembly shops, Proceedings of the 17th Annual (International) Conference on Mechanical Engineering (ISME2009), Tehran University, Iran, May, 2009.

● Sadeghi, A., Asgarshamsi, A.H., Saidi, M.H., Laminar Forced Convection in Annular Microchannels with Slip Flow Regime, 7th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM2009), Pohang, Korea, June, 2009.

● Sadeghi, A., Asgarshamsi, A.H., Saidi, M.H., Analysis of Laminar Flow in the Entrance Region of Parallel Plate Microchannel for Slip Flow, 7th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM2009), Pohang, Korea, June 22-24, 2009.

● Besharat, S., Ghafourian, A., Saidi, M. H., Mozafari, A.A., Theoretical and Experimental Modeling of Vortex Engine in Ramjet Application, AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Colorado, USA, August, 2009.

● Dehghani, S.R., Saidi, M.H., Mozafari, A.A., Ghafourian, A., Spray Dispersion in Bidirectional Vortex Flow, International Conference on Applications and Design in Mechanical Engineering, ICADME2009, Perlis, Malaysia, Oct. 11-13, 2009.

● Sadeghi, A., Asgarshamsi, A.H., Saidi, M.H., Second Law Analysis of Slip Flow Heat Transfer in Annulus, ASME 2009 Heat Transfer Summer Conference HT2009, San Francisco, California, July 12-14, 2009.

● Hanafizadeh, P., Sajadi, B., Saidi, M.H., Khalkhali, H., Taherraftar, M., Semi Analytical Prediction of Automobile Body Temperature Distribution in the Top Coat Paint Oven, ASME 2009 Heat Transfer Summer Conference HT2009, San Francisco, California, July 12-14, 2009.

● Sajadi, B., Sayyadi, P., Saidi, M.H., Consumption Criteria and Energy Labeling of Wet Cooling Towers in Iran, ASME-2009 Power Conference, Albuquerque, New Mexico, USA, July 21-23, 2009.

● Hanafizadeh, P., Saidi, M.H., Zamiri, A., Karimi, A., Effect of Bubble Size and Angle of Tapered Upriser Pipe on the Effectiveness of a Two Phase Lifting Pump, ASME-2009 Fluid Engineering Division Summer Meeting (FEDSM2009), Colorado, USA, August, 2009.

● Ghazi, R., Saidi, M.S., Saidi, M.H., Electrode Arrangement Effect on Natural Convection in a Horizontal Enclosure, 7th International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June, 2009.

● Ghazi, R., Saidi, M.S., Saidi, M.H., Numerical Study of an Ion Injection EHD Micropump, 7th International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June, 2009.

● Gholizadeh, A., Saidi, M.H., Saidi, M.S., Shafiee, M.B., Optimization of Micro CHP System with E2 Calculations to Meet Energy Demands of Residential Buildings in Iran, ASME-2009 Power Conference, Albuquerque, New Mexico, USA, July 21-23, 2009.

● Irani, R.A., Saediamiri, M., Saidi, M.S., Shafiee, M.B., Saidi, M.H., One Dimensional Numerical Investigation of a Cylindrical Micro Combustor, ASME-2009 Heat Transfer Summer Conference HT2009, San Francisco, California, July 12-14, 2009.

● Dehghani, S.R., Ghafourian, A., Saidi, M.H., Mozafari, A.A., Experimental and Analytical Investigation on Effective Chamber Length in Monopropellant Spray Combustion, Proceedings of the 17th Annual (International) Conference on Mechanical Engineering-ISME, Tehran University, Iran, May, 2009.

● Saidi, M.H., Irani, R.A., Seifmusavi, S.M., Investigation of Using Water from Interstage Feed Water Pump as Reheat Spray and Its Effect on the Cycle Performance Parameters, ASME-2008 Power Conference, Orlando, Florida, USA, July 22-24, 2008.

● Saidi, M.S., Saidi, M.H., Hanafizadeh, P., Sajadi, B., Irani, R.A., Transient Prediction of Automobile Body Temperature Distribution in the ED Paint Dryers: Analytical – Numerical Approach, 4th International Conference on Energy Research & Development, Kuwait, October, 2008.

● Saidi, M.S., Saidi, M.H., Pirouzpanah, S., NikPartov, A., Thermo Hydrodynamic Modeling of a Single Bubble Nozzle-Diffuser Phase Change Micropump, 6th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM2008), Darmstadt, Germany, June, 2008.

● Irani, R.A., Saidi, M.S., Saidi, M.H., One Dimensional Numerical Study of a Two Stage Porous Burner, Proceedings of the 16th Annual (International) Conference on Mechanical Engineering-ISME, Shahid Bahonar University, Kerman, Iran, May, 2008.

● Mahboubi, D., Saidi, M.H., Amiriyarahmadi, M., Mathematical Optimization of Chilled Water Cooling Coil, 4th International Conference on Energy Research & Development, Kuwait, October, 2008.

● Lajvardi, S.M., Saidi, M.H., Anoshahpour, M., Building Footprint Optimization for Two Iranian Cities via Genetic Algorithm Application, ESIM-2008, Laval University, Quebeque, Canada, May 21-22, 2008.

● Mahboubi. D, Saidi, M.H., Optimal Behaviour of Hot Water Heating Coils at Steady Conditions, ASME International Mechanical Engineering Congress and Exposition (IMECE2008-68455), pp. 1427-1432, Boston, Massachusetts, Oct. 31-Nov.6, 2008.

● Saidi, M.H., Sarikhani, N., Jafarian, D.A., Hannani, S.K., Three - Dimensional Analysis of Fluid Flow and Heat TRansfer in the Microchannel Heat Sink Using Additive - Correction Multigrid Technique, Micro/Nanoscale Heat Transfer International Conference, Tainan, Taiwan, January,2008.

● Asgari, O., Saidi, M.H., Asymptotic and Exact Analysis for Constrctal Optimization of Microchannel Heat Sink, Micro/Nanoscale Heat Transfer International Conference, Tainan, Taiwan, January,2008.

● Saidi, M.H., Baniamerian, Z., Mahdipour, R., A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car, Conference on Applications and Design in Mechanical Engineering (CADME2007), Perlis, Malaysia, October, 2007.

● Jamali, M., Saidi, M.H., Ghafourian, A., Mozafari, A.A., Dehghani, S.R., A New Approach to the Analytical and Numerical Solution of the Bidirectional Vortex Flow, 43rd AIAA /ASME/SAE/ASEE Joint Propulsion Conference and Exhibition, Ohio, USA, July, 2007.

● Saidi, M.H., Jamali, M., Ghafourian, A., Mozafari, A.A., Numerical Modelling of Evaporating Droplet with Direct Quadrature-Based Moments of Closure Method, 60th Annual Meeting and Conference of CFD, Salt Lake City, USA, November, 2007.

● Zaker, K., Saidi, M.H., Hannani, S.K., Jafarian, D.A., Two Dimensional Analysis of the Tube Section of a Typical Pulse Tube Refrigerator, 22nd International Congress of Refrigeration, Beijing, China, August, 2007.

● Jafarian, D.A., Saidi, M.H., Hannani, S.K., Kenarsari, S., A One Dimensional Model for Compressible Oscillatory Flow in the Regenerator of Pulse Tube Refrigerator, 22nd International Congress of Refrigeration, Beijing, China, August, 2007.

● Nasiri, A., Taeibi, R.M., Saidi, M.H., Heat Pipe Optimization Through Entropy Generation Minimization, 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Sun City, South Africa, 2007.

● Saidi. M.H., Mahboubi. D, Thermodynamic Modeling and Optimization of Air Handling Units, Proceedings of the Wellbeing Indoors Conference, Helsinki, Finland, 2007.

● Saidi. M.H., Mahboubi. D, Optimization of Air Handling Units, Proceedings of the Iranian Society of Mechanical Engineers Conference (ISME2007), Tehran, Iran, 2007.

● Darbandi, M., Saidi, M.H., Hanafizadeh, P., A Numerical Approach to Simulate Two-Phase Flow in Airlift Pumps, The International Conference on Computational Methods (ICMM2007), Hiroshima, Japan, April 5-7, 2007.

● Saidi, M.H., Sadjadi, B., Pumping Effect of Bubble Growth and Collapse in Microchannels: Thermo-hydraulic, 15th Annual (International) Conference on Mechanical Engineering-ISME2007, Amirkabir University of Technology, Tehran, Iran, May, 2007,

● Saidi, M.H., Mozafari, A.A., Ghasemi, A., A new Design for Inlet Diffuser of Automotive Catalytic Converter, Proceedings of ICES2006, ASME Internal Combustion Engine Division, Aachen, Germany, May 8-10, 2006.

● Saidi, M.H., Mozafari, A.A., Esmaeili Sany, A.R., Neyestani, J., Experimental Study of Thermal Performance and Pressure Drop in Compact Heat Exchanger In-stalled in Automotive, Proceedings of ICES2006, ASME Internal Combustion Engine Division, Aachen, Germany, May 8-10, 2006.

● Mozafari, A.A., Saidi, M.H., Neyestani, J., Sany, A.E., Experimental Modeling of Air Temperature and Velocity Distribution in an Engine Compartment, Proceedings of FEDSM2006, ASME Joint U.S. European Fluids Engineering Summer Meeting, Miami, FL. USA, July 17-20, 2006.

● Saidi, M.H., Ghafourian, A., Kargar, M., Faisal, M., Swirl Flow Effects on Heat Release/ Luminuos Radiation in a Vortex Engine, Proceedings of FEDSM2006, ASME Joint U.S. European Fluids Engineering Summer Meeting, Miami, FL. USA, July 17-20, 2006.

● Abyaneh, M.H., Saidi, M.H., Velocity Distribution in (r, 𝜃) Direction for Laminar Flow of a Film around Horizontal Circular Tube, Proceedings of FEDSM2006, ASME Joint U.S. European Fluids Engineering Summer Meeting, Miami, FL. USA, July 17-20, 2006.

● Abbassi, H., Saidi, M.H., Zangeneh Kazemi, P., Analysis of Microchannel Heat Sink Performance for Electronics Cooling Based on Thermodynamics, Proceedings of ASME, 4th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2006), Limerick, Ireland, June 19-21, 2006.

● Saidi, M.H., Sadjadi, B., Investigation of Phase Change Micropump: An Experimental Approach Proceedings of IMECE2006, ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, USA, Nov. 5-10,2006.

● Saidi, M.H., Sadjadi, B., Analytical Modeling of Bubble Growth in Microchannels, Proceedings of IMECE2006, ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, USA, Nov. 5-10, 2006.

● Saidi, M.H., Sadjadi, B., Safaei, H., Pirouzpanah, S., Experimental and Analytical Modeling of Phase Change Micropump, Proceedings of 8th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA2006), Torino, Italy, July 4-7, 2006.

● Saidi, M.H., Sadjadi, B., Analytical Modeling of Bubble Dynamics in Micro Channels, Proceedings of 10th Fluid Dynamics Conference, Yazd University, Iran, November 2006, (In Persian).

● Saidi, M.H., Amjadi, V., Modeling of Condensation in an Inclined Elliptical Tube, Proceedings of 10th Fluid Dynamics Conference, Yazd University, Iran, November 2006, (In Persian).

● Abyaneh, M.H.J., Saidi, M.H., Velocity Distribution Comparison in (r, 𝜃) and (x, y) Coordinates for Falling Film Flow of LiBi-Water Solution over a Horizontal Circular Tube, Proceedings of 10th Fluid Dynamics Conference, Yazd University, Iran, November 2006, (In Persian).

● Ghasemi, A., Saidi, M.H., Mozafari, A.A., Kamand Loi, D., An Optimized Model for Inlet Diffuser of a Catalytic Converter for Uniform Flow Distribution, 14th Annual and 10th International Mechanical Engineering Conference, Isfahan University, Iran, May, 2006, (In Persian).

● Razi, M., Farrokhi, M., Saidi, M.H., Faghih Khorasani, A.R., Predictive Control of Automotive HVAC System, 14th Annual and 10th International Mechanical Engineering Conference, Isfahan University, Iran, May, 2006, (In Persian).

● Sany, A.E., Neyestani, J., Saidi, M.H., Mozafari, A.A., Experimental Investigation of Automotive Cooling System Based on ATB Temperature and Radiator Overall Effectiveness, 14th Annual and 10th International Mechanical Engineering Conference, Isfahan University, Iran, May, 2006, (In Persian).

● Saidi, M.H., Vazirifard, S., Thermodynamic Comparison of a Hybrid Desiccant Cooling System with Conventional Vapor Compression System, Proceedings of 8th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2006), Torino, Italy, July 4-7, 2006.

● Saidi, M.H., Mehrabian, A., Design Optimization of Diffuser Type Valveless Micropump, Proceedings of 8th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2006), Torino, Italy, July 4-7, 2006.

● Ahmadian, M.T., Saidi, M.H., Mehrabian, A., Bazargan, M., and Kenarsari, S.D., Performance of Valveless Micropumps under Harmonic Piezoelectric Actuation, Proceedings of 8th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2006), Torino, Italy, July 4-7, 2006.

● Jafarian, A., Saidi, M.H., Hannani, S.K., Optimization Analysis of Alternate Tube Section for Pulse Tube Refrigerator, Proceedings of 8th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2006), Torino, Italy, July 4-7, 2006.

● Razi, M., Farrokhi, M., Saidi, M.H., Faghih Khorasani, A.R., Neuro- Predictive Control for Automotive Air Conditioning System, Proceedings of IEEE Conference, 2006.

● Najafi, A.F., Soadati, E., Saidi, M.H., Numerical Analysis of Effect of Swirling Air On the Performance of Power Plant Burner, Proceedings of 21th International Power System Conference, PSC 2006, Tehran, Iran, 2006.

● Saidi, M.H., Majidian, A.R., Life Prediction of Condenser Tubes Using Fuzzy Logic and Neural Network Methods, Proceedings of 21th International Power System Conference (PSC2006), Tehran, Iran, 2006.

● Saidi, M.H., Hendijanifard, M., 3D Contaminant Removal Improvement from a Typical Clean Room, Proceedings of 4th ICCHMT, Paris – Cachan, France, pp. 530- 534, May 17-20, 2005.

● Saidi, M.H., Sabouhi, Y., Khatami, R., Numerical Investigation of a Diffusion Two Stage Porous Burner, Proceedings of 4th ICCHMT, France, pp. 584- 589, May 17-20, 2005.

● Abbassi, A., Saidi, M.H., Ehyaei, M.A. Energy and Exergy Analysis of a PEFC Cogeneration Plant, Proceedings of the Second International Exergy, Energy and Environment Symposium, Kos, Greece, 3-7 July, 2005.

● Saidi, M.H., Abbassi, A., Ehyaei, M.A. Exergetic Optimization of a PEM Fuel Cell for Domestic Hot Water Heater, Proceedings of the International Green Energy Conference, Waterloo, Ontarion, Canada, June 12-16, 2005.

● Saidi, M.H., Sabouhi, Y., Khatami, R., Two Dimensional Numerical Study of a Premixed Two Stage Porous Burner, 13th Annual (International) Mechanical Engineering Conference, Isfahan University of Technology, Isfahan, Iran, May 2005.

● Esfandiari Nia, F., van Passen, D., Saidi, M.H., Comparison of a New Modeling Approach with the Experimental and Numerical Modeling for Enthalpy Wheel and Air Dehumidifier: Study of Optimum Speed and Wall Effects, Proceedings of 2005 ASME Summer Heat Transfer Conference, San Francisco, California, USA, 17-22 July, 2005.

● Saidi, M.H., Mehrabian, A., Analysis of Two Phase Flow across a Normal Shock Wave and Relaxation Zone with Drift Velocity Effects, Proceedings of 2005 International Institute of Refrigeration Conference, Vicenza, Italy, August 2005.

● Saidi, M.H., Salehi, M., Khiabani, R.H., Performance of Micro Channel Heat Sink Used in Integrated Micro-Cooling Devices, Proceedings of 2005 International Institute of Refrigeration Conference, Vicenza, Italy, August 2005.

● Esfandiari Nia, F., van Passen, D., Saidi, M.H., Methods for Study of the Sorption Characteristic Curve Effect on Sensible and Latent Efficiency of Regenerators, Proceedings of International Sorption Heat Pump Conference, Denver, CO, USA, June 22-24, 2005.

● Abyaneh, M.H., Saidi, M.H., Simulation of Direct Fired Double Effect LIBR-H2O Absorption Chillers, Proceedings of International Sorption Heat Pump Conference, Denver, CO, USA, June 22-24, 2005.

● Esfandiari Nia, F., van Passen, D., Saidi, M.H., A New Approach to Heat and Mass Transfer in a Rotary Dehumidifier: Modeling and Simulation, Proceedings of ASME Joint U.S. European Fluids Engineering Summer Meeting (FEDSM2006), Miami, FL. USA, July 19-23, 2005.

● Saidi, M.H., Sadjadi, B., Analytical Modeling of Bubble Growth in Microchannels, Proceedings of ASME International Mechanical Engineering Congress and Exposition (IMECE2006), Chicago, Illinois, USA, Nov. 5-10,2006.

● Ramezanizadeh, M., Taeibi – Rahni, M., Saidi, M.H., Large Eddy Simulation of Normally Injected Cold Jets into a Hot Cross – Flow, 9th UK National Heat Transfer Conference, Manchester, UK, September 5-6, 2005.

● Saidi, M.H., Salehi, M., Khiabani, R.H., An Approach to the Optimum Design of Two Layered Microchannel Heat Sinks, 9th UK National Heat Transfer Conference, Manchester, UK, September 5-6, 2005.

● Kabiri – Samani, A.R., Borghei, S.M., Saidi, M.H., Air- Water Two – Phase Flow Maps in Horizontal and Inclined Water Pipelines, Proceedings of 5th Iranian Hydraulic Conference, Shahid Bahonar University, Kerman, Iran, Nov. 8-10, 2005. (In Persian)

● Farvardin, E., Ghafourian, A., Saidi, M.H., Experimental /Numerical Investigation of Heat Transfer in Vortex Combustion Engines, Proceedings of ASME International Mechanical Engineering Congress and Exposition (IMECE2005), Orlando, Florida, USA, Nov. 5-11, 2005.

● Kalantarian, A., Khodabakhsh, M., Saidi, M.H., Similarity Solution of Free Convection in a Stratified Porous Medium with Variable Permeability, Proceedings of 2005 ASME Summer Heat Transfer Conference, San Francisco, California, USA, 17-22 July, 2005.

● Pirouzpanah, V., Eisazadeh Far, K., Saidi, M.H., Knock Phenomena in Dual Fuel Engines: Otto Knock or Diesel Knock, 4th International Conference on Internal Combustion Engines, Tehran, Iran, November 2005.

● Saidi, M.H., Salehi, M., Khiabani, R.H., Analysis of Micro Channel Heat Sink Performance, Society of Experimental Mechaniics (SEM Annual Conference), Portland, Oregan, USA, USA, June, 2005.

● Saidi, M.H., Pirouzpanah, V., Eisazadeh Far, K., Analysis of Combustion Process in Dual Fuel Diesel Engines: Knock Phenomena Approach, SAE 2005 World Congress and Exhibition, Detroit, USA, April, 2005.

● Saidi, M.H., Vazirifard, S., Key Variable Evaluation of Hybrid Desiccant Cooling Systems, 3rd International Conference on Energy Research and Development, Kuwait, Nov., 2005.

● Asadi, B., Taeibi–Rahni, M., Saidi, M.H., Numerical Simulation of Bubble Hydrodynamic Applying Front Capturing Method, 13th Annual(International) Mechanical Engineering Conference, Isfahan University of Technology, Isfahan, Iran, May 2005.

● Asadi, B., Saidi, M.H., Taeibi –Rahni, M., Numerical Simulation of Bubble Hydrodynamic at Low Gravity and The role of Cpillarity effects on Bubble Motion, 13th Annual (International) Mechanical Engineering Conference, Isfahan University of Technology, Isfahan, Iran, May 2005.

● Saidi, M.H., Salehi, M., Montazeri, A., Second Law Analysis of Hartmann Flow with Hall Effect in MHD Generators 15th Joint Riga – Pamir, Conference on MHD Energy Conversion, Latvia, Letoni, June 27- July 1, 2005.

● Saidi, M.H., Mozafari,A.A., Sharifian, L., Optimized Cooling System for PEM Fuel Cell Stack based on Entropy Generation Minimization, Proceedings of 7th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA2004), Manchester, UK, July, 2004.

● Saidi, M.H., Taeibi-Rahni, M., Mirkhani, S., Fractal Dimension in a 2-D Chaotic Mixing Flow, International Conference on Mathematics and its Applications, Kuwait, April 5, 2004.

● Eisazadeh Far, K., Saidi, M.H., Pirouzpanah, V., A Kinetic Model for Knock Formation Prediction in Dual Fuel Diesel Engines, 1st Cappadocia International Mechanical Engineering Conference, Turkey, 4-16 July 2004,

● Jahangirian, S., Abarham, M., A. Ghafourian, A., Saidi, M.H., Effect of Vortex Flow on Heat Transfer to Combustion Chamber Wall, Proceedings of 2004 ASME International Mechanical Engineering Congress and Exposition, 13-19 November, California, USA, 2004.

● Saidi, M.H., Ghafourian, A., Abarham, M., Jahangirian, S., Experimental-Numerical Investigation of the Effect of Vortex Flow in Cooling the Combustion wall of Gas Diffusion Flame, Proceedings of 12th Annual and 8th International Mechanical Engineering Conference, May19-21, 2004.

● Ramezani-Zadeh, M., Saidi, M.H., Taeibi-Rahni, M., Investigation of Density Ratio in Two-Dimensional Film Cooling, Using Large Eddy Simulation Approach, 2nd BSME-ASME International Conference on Thermal Engineering, January 2-4, 2004.

● Najafi, A. F., Saidi, M.H., Sadeghipour, M.S., Turbulence Modeling in a Swirling Decay Pipe Flow, 2nd BSME-ASME International Conference on Thermal Engineering, January 2-4, 2004.

● Najafi, A.F., Saidi, M.H., Sadeghipour, M.S., Souhar, M., Boundary Layer Solution for the Turbulent Swirling Decay Flow through a Fixed Pipe: SBR at the Inlet, Proceedings of IMECE'03, 2003 ASME International Mechanical Engineering Congress & Exposition, November 15, 21, 2003, Washington, D.C., USA.

● Najafi, A.F., Saidi, M.H., Sadeghipour, M.S., Experimental and Numerical Investigation of Fluid Flow inside Suction Tube of Francic Turbine, Proceeding of National Conference of Hydrau-Electric Power Plants, 7-9, 2003.

● Saidi, M.H., Faghih, A.R., KOuhi-Kamali, R., Numerical Simulation and CAE Model of Vehicle Heating Cooling System, Proceeding of 11th Annual Conference(International) of Mechanical Engineering, 526-534, May13-15, 2003.

● Najafi, A.F., Saidi, M.H., Sadeghipour, M.S., Souhar, M., Vortex Flow Analysis inside Suction Tube of a Francic Turbine, Proceeding of 8th Fluid Dynamics Conference, Tabriz, September 7-9, 2003.

● Jani, S., Saidi, M.H., Mozafari, A.A., and Heydari, A., Second Law Based Optimization of Falling Film Single Tube Absorption Generator, Proceedings of IMECE'02, 2002 ASME International Mechanical Engineering Congress & Exposition, November 17, 22, 2002, New Orleans, Louisiana, USA

● Saidi, M.H., Kazemzadeh, S., and Jafarian-Dehkordi, A., Sectoral Energy and Exergy Analysis of Iran, Proceeding of 4th National Energy Congress of Iran, May 9-10, 2002.

● Saidi, M.H., Valipour, M.S., Effect of Thermophysical and Geometrical Parameters on Vortex Tube Performance, 9th Annual and 5th International Mechanical Engineering Conference, May 26-28, 2002.

● Alasti, A., Saidi, M.H., Ghafouri, M., Realization of Controling Model Parameters of a Petrol Engine, 9th Annual and 5th International Mechanical Engineering Conference, May 26-28, 2002.

● Saidi, M.H., Shabani, B., Simulation of 4 Stroke Water Cooled S.I. Engine Cooling System, 2nd International Conference on Internal Combustion Engine, February 15-17, 2002.

● Saidi, M.H., Shabani, B., Effect of Controling Parameters on 4 Stroke Water Cooled S.I. Engine Cooling System, Proceeding of 10nd Annual (International) Mechanical Engineering Conference, 24-26 May, 2002.

● Saidi, M.H., Kazemzadeh, S., Mansouri, A., Saidi, H., Experimental and Numerical Investigation of Nozzle Mixing Gas Fuel Burners, Proceeding of 10nd Annual(International) Mechanical Engineering Conference, May 24-26, 2002.

● Valipour, M.S., Saidi, M.H., Adaptive Modling of Energy Separation in Vortex Tube, Proceeding of 10th Annual Mechanical Engineering Conference, May 24-26, 2002.

● Saidi, M.H., Mozafari, A.A., Moradian, A., Changes in Availability at Homogeneous Nucleation in a Uniform Electric Field, Proceeding of 7th National Iranian Chemical Engineering Congress, October 28-31, 2002, 32-38.

● Saidi, M.H., Shokrollahi, S., An Approach to Design of MED Desalination Plants, 2nd International Conference on Energy Research and Development, Kuwait, April 2002.

● Valipour, M.S., Saidi, M.H., Experimental Modelling of a Vortex Tube Refrigerator, 9th Asian Congress of Fluid Mechanics, Isfahan, Iran, May 2002.

● Saidi, M.H., Moradian, A., Exergy Analysis for Bubble Formation in Electrohydrodynamically Enhanced Nucleate Boiling, Proceedings of the 6th ASME Engineering Systems Design and Analysis Conference (ESDA2002/AES-035), Istanbul, Turkey, June 8-11, 2002.

● Jani, S., Saidi, M.H., Mozafari, A.A., and Heydari, A. Falling film Absorption Generators, ASME International Mechanical Engineering Congress and Exhibition (IMECE2002), New Orleans, Louisiana, USA, Nov. 17-22,2002.

● Behdashti, A., Kazemzadeh, S., Saidi, M.H., Elhami, A.R., Gas Turbine Power Augmentation in Hot Season by Inlet Air Cooling, Proceeding of 17th International Power System Conference (PSC 2002), 39-45, October 27-29, 2002.

● Shakeri, M, Saidi, M.H., Salehi, M., Nucleate pool Boiling Heat Transfer of R-134a in an Enhanced Tube Bundle, Proceedings of 17th Canadidan Congress of Applied Mechanics, May 30-June 3,1999.

● Saidi, M.H., Ohadi, M., and Souhar, M., Nucleate Pool Boiling of R-123 Refrigerant on Two New Enhanced Tubes, Proceedings of Micro-Scale Heat Transfer, EUROTHERM Seminar 57, France, 8-10 July 1998.

● Saidi, M.H., Yazdi, M.R.A., and Souhar, M., Exergy Model of Vortex Tube System, Adapting Experimental Results, Proceedings of Symposium on Thermal and Fluids Engineering in CSME Forium 98, Toronto, Canada, May 19-22,1998.

● Saidi, M.H., Yazadi, M.R.A., Availability Analysis of Vortex Tube Refrigerator, Proceedings of 16th Canadian Congress of Applied Mechanics, June 1-5, 1997.

● Saidi, M.H., Salehi, M., Haji, A.A., Experimental Investigation of Nucleate Boiling of R-123 on New Enhanced Tubes, Proceedings of 16th Canadian Congress of Applied Mechanics, June 1-5, 1997.

● Saidi, M.H., Jalaleddin Abyaneh, M.H., Rad, M., A Survey of Flooded Condenser and Evaporator in a Refrigeration System: Experimental and Theoretical Approach, 2nd International Mech. Eng. Conf., Shiraz, Iran, may 1996.

● Amirfazli, A., Saidi M.H., Requirements for Modular Design of Automobiles, 28th International Symposium on Automotive Technology, Stuttgart, Germany, Sept.1995.

● Ghaderi, M., Salehi, M., Saidi, M.H., Adopting the Appropriate Correlations by Comparison for predicting Condensation, Proceedings of IASTED, International Conference on Applied Modelling, Simulation, Cancum, Mexico, June 1995.

● Saidi, M.H., Shirvaninn, A., A Modular Computational Method for Mathematical Modelling and Optimization of Steam power plant Cycle, Numerical Methods in Thermal problems, U.S.A., July 1995.

● Jalaleddin Abyaneh, M.H., Saidi, M.H., Rad, M., Experimental & Theoretical Comparison of Condenser, Proceedings of 15th Canadian Congress of Applied Mech., Vol. 1, June 1995.

● Sohrabpoor, S.S., Saidi, M.H., Akbari, M.R., A Simplified Method of Simulation and Optimization for …, Proceeding of 15th Canadian Congress of Applied Mech., Victoria, Canada, Vol. 2, June 1995.

● Saidi, M.H., Shirvanian, A., Rankoptim: A Computer Software for the Analysis of Rankine Cycle, Proceedings of 15th Canadian Congress of Applied Mech., Victoria, Canada, Vol. 2, June 1995.

● Ghaderi, M., Salehi, M., Saidi, M.H., Review of Condensation Heat Transfer Correlations for Smooth & Enhanced Tube, Heat & Mass Transfer for Energy Eff. ASME, 1995.

● Saidi, M.H., and Ashrafizadeh, M., CYCLAN A Computer program for Modular Investigation of Rankine Cycle, International Conference on Engineering Applications of Mechanics, Sharif University of Technology, Tehran, Tehran, Iran, June 1992.

● Meguerdichian, M., and Saidi, M.H., Effect of Humidity on Engine performance, 18th International Conference on Automation and Automotive Engineering, Florence, Italy, May 30– June 3, 1988.

● Saidi, M.H., and Khandani, S.M.H., Thermal Properties of Composite Materials in Humid Atmosphere, 4th Miami International Symposium on Multiphase Transport and Particulate Phenomena, 15-17 Dec. 1986. Vol. 5, Hemisphere publishing Co., 1988 pp. 425-433, 1988.

Last update: April 21, 2021

Books and Book Chapters

● Sharifzadeh, M., Chen, W., Triulzi, G., Hu, M., Borhani, T.N., Saidi, M., Krishnan, V., Ghadrdan, M., Qadrdan, M., Zhao, Y., Mohammadzadeh, A., Naghibzadeh, S.K., Saidi, M.H., Rashtchian, D., Shah, N., Design and operation of solid oxide fuel cell systems: challenges and future research directions, Chapter 15 of the book titled: Design and Operation of Solid Oxide Fuel Cells, pp. 445-463, 2020, ISBN 978-0-12-815253-9.

● Mohammadzadeh, A., Naghibzadeh, S.K., Saidi, M.H., Sharifzadeh, M., Mechanical engineering of solid oxide fuel cell systems: geometric design, mechanical configuration, and thermal analysis, Chapter 3 of the book titled: Design and Operation of Solid Oxide Fuel Cells, pp. 85-130, 2020, ISBN 978-0-12-815253-9.

● Ahmadi, P., Saidi, M.H., Dincer, E., Performance Assessment of a Hybrid Solid Oxide Fuel Cell-Gas Turbine Combined Heat and Power System, Progress in Exergy, Energy and the Environment, Chapt. 20, Springer, 2014, ISBN 978-3-319-04680.

● Saidi, M.H., Asgari, O., Hemati, H., Microchannels Simulation, Chapter 8 of the book titled: Heat Exchangers, Basics Design Applications, Intech Publisher, 1st Ed. 2012, ISBN 978-953-51-0278.

● Saidi, M.H., Sadeghi, A., Heat Transfer at Microscale, Chapter 20 of the book titled: Heat Transfer: Mathematical Modeling, Numerical Methods and Information Technology, Chapt. 20, In Tech Publisher, 1st Ed. 2011, ISBN 978-453-307-550-1.

● Saidi, M.H., Talaei, M.R., Thermal Power Plants, (In Persian), Yazda Publisher, 1st Ed. 464 pages, 2009, ISBN 978-600-5549-19-5.

Last update: April 21, 2021