Sharif University of technology
Department Mechanical Engineering
Center of Excellence in Energy Conversion

Conference Publication

Conference Proceedings (since 2000)

  • Mirshahi, S., Yadegari-Dehkordi, S., Rismanian, M., Sazgarnia, A. and Saidi, M.S., 2019. Prediction of Induced Transmembrane Voltage and percent of Cancerous Cell Viability Affected by Electric Pulses. 3th International Conference on Science and Development of Nanotechnology
  • Moshksayan, Khashayar, Navid Kashaninejad, and Mohammad Said Saidi. "Mathematical Analysis of a Conventional Microfluidic Tumor Spheroid Culturing Chip." International Congress of Cancer Prevention & Early Detection (2017).
  • Moshksayan, K., N. Kashaninejad, and M. S. Saidi. "Numerical investigation of the effects of functional 671 parameters in hypoxia initiation within a cell spheroid cultured in a microfluidic chip." In 25th Annual International 672 Conference on Mechanical Engineering held by ISME, pp. 861-862. (2017).
  • Milad Ebadi, Navid Kashaninejad, and Mohammad Said Saidi. “Design, fabrication and numerical analysis of concentration gradient generator.” 25th International Conference on Mechanical Engineering, 2 (2017).
  • Sanatkhani, Soroosh, Mohammad Said Saidi, and Mohammad Hosein Banazadeh. "Urine concentrating mechanism modelling in rat kidney inner medulla." In Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME), 2016 23rd Iranian Conference on, pp. 111-116. IEEE, (2016).
  • Jafari, Somaye, Masoud Darbandi, and Mohammad Said Saidi. "Computational Investigation of Graphene Behavior under Differential Water Pressure and Possible Mass Transfer Influences." In ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, pp. V002T10A007-V002T10A007. American Society of Mechanical Engineers, (2016).
  • Sharifi, Fatemeh, Bahar Firoozabadi, Mohammad Said Saidi, and Keikhosrow Firoozbakhsh. "Numerical modeling of ureagenesis in a microfluidic channel mimicking a liver lobule." In Biomedical Engineering (ICBME), 2015 22nd Iranian Conference on, pp. 54-59. IEEE, (2015).
  • H. Rajabzadeh, B.Firoozabadi, M. S. Saidi, S. Sohrabi, S. M. NematiMehr, Numerical Modeling of Pulsating Inflow to the Pulmonary Arteries in TCPC Morphology Using FSI Approach, Proc. ASME. 56215; Volume 3A: Biomedical and Biotechnology Engineering, 2013
  • M. Monjezi, A.Rouhollahi, M. S. Saidi, B. M. Afshary, “Fluid-structure interaction analysis of airflow in the lung alveolus”, 21st Annual InternationalConference on Mechanical Engineering-ISME2013, (2013)
  • M. Monjezi, M. Ghoreyshi, M. S. Saidi, M. A. Navabi, B. D. Firoozabadi, “Numerical investigation of antegrade flow effects on flow pulsations in Fontan operation using a multiscale model”, 19th Iranian Conference on BioMedical Engineering-ICBME 2012, (2012(
  • S.A Mirbagheri, M.S Saidi, B. Dehghan Firoozabadi, A Simple Model of Intimal Thickening- Effects of Hypertension, 19th Iranian Conference on BioMedical Engineering (ICBME), (2012)
  • Ali Hemmatifar, Mohammad Said Saidi, and Arman Sadeghi, Three-Dimensional SizeDependent Dielectrophoretic Manipulation of Microparticles with Oblique Electrodes, International Conference onMechanical Engineering and Advanced TechnologyICMEAT2012, Isfahan,Iran, (2012)
  • M.Zabetian, M.S.Saidi, M.H.Saidi, M.B.Shafii, Thermal interaction of laser beam with particulate flows, ASME, International Conference on Nanochannels, Microchannels, and Minichannels ICNMM(2011)
  • M.Zabetian, M.H.Saidi, M.S.Saidi, M.B.Shafii, Laser induced flow in particulate media, ASME, International Conference on Computational Heat and Mass Transfer, ASME,ICCHMT (2011)
  • Yaghubi Kupaei, S., Pishevar, A.R., Saidi, M.S., Afshar, Y., Self-assembly modeling of biological membranes by dissipative particle dynamics method, Proceedings of the 18th Annual International Conference on Mechanical Engineering-ISME2010, 11-13 May, 2010, Sharif University of Technology, Tehran, Iran.
  • Dastanpour, R., Monjezi, M., Saidi, M.S., Pishevar, A.R., Monte Carlo modeling of aerosol deposition in human lung's five lobes, 13th Annual & 2nd International Fluid Dynamics Conference, FD2010-26-28 Oct. Shiraz University, 2010.
  • Monjezi, M., Dastanpour, R., Saidi, M.S., Pishevar, A.R., 3D-1D Modeling of the respiratory track, 13th Annual & 2ndInternational Fluid Dynamics Conference, FD2010-26-28 Oct. Shiraz University, 2010.
  • Emami, M.D., Saidi, M.S., Safaei, H., A comparison between Blasco-Chorda and Haselbacher-Najjar algorithms in computation of particle tracking in a flow field, Proceedings of 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 19-21 July, 2010, Anatalya, Turkey.
  • Safaei, H., Emami, M.D., Saidi, M.S., A new robust algorithm for particle tracking on unstructured grids, 13th Annual & 2nd International Fluid Dynamics Conference, FD2010-26-28 Oct. Shiraz University, 2010.Zendehbad, M., Saidi, M.S., Sani, M., Cavitation risk assessment for tube-sheets of HPFW heaters of Shzand TPP, Proceedings of 2nd Conference on thermal plants (IPG2010), 2010, Tehran, Iran.
  • Zendehbad, M., Saidi, M.S., Sani, M., Effect of geometric hysteresis in lung deformation on irreversibility in trajectories of fine inhaled particles, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, EDSA2010, July 12-14, 2010, Istanbul, Turkey.
  • Ghazi, R., Saidi, M.S., and Saidi, M.H., Electrode Arrangement Effect on Natural Convection in a Horizontal Enclosure, Proceedings of the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels ICNMM2009, June 2224, 2009, Pohang, South Korea.
  • Ghazi, R., Saidi, M.S., and Saidi, M.H., Numerical Study of an Ion Injection EHD Micropump, Proceedings of the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels ICNMM2009, June 22-24, 2009, Pohang, South Korea.
  • Jafarian, A., Pishehvar, A.R., Saidi, M.S., Modeling incompressible fluid flow using SPH, 12th Annual Fluid Dynamics Conference, FD2009-28-30 April, NowshiravaniBabol University of Technology, 2009.
  • Gholizadeh, A., Saidi, M.H., Saidi, M.S., Shafiei, M.B., Optimization micro CHP system with e2 calculations to meet energy demands of residential buildings in Iran, Proceedings of 2009 ASME Power 2009 July 21-23, 2009, Albuquerque, New Mexico, USA.
  • Saidi, M.S., Saidi, M.H., Hanafizadeh, P., Sajadi, B., Transient prediction of automobile body temperature distribution in the ED paint dryers: analytical-numerical approach, Proceedings of the Fourth International Conference on Energy Research & Development, Kuwait, 2009.
  • Irani, A., Saediamiri, M., Saidi, M.S., and Saidi, M.H., One-dimensional numerical investigation of a cylindrical micro combustor, Proceedings of the ASME 2009 Heat Transfer Summer Conference HT2009, July 19-23, 2009, San Francisco, California USA.
  • Irani, A., Saidi, M.S., and Saidi, M.H., 1D Numerical study of a two-stage porous burner: a newapproach in combustion modeling, Proceedings of 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, ShahidBahonar University of Kerman, Iran.
  • Saidi, M.H., Saidi, M.S., Sajadi, B., Hanafizadeh, P., and Irani, A., Ventilation system design for automobile assembly shops, Proceedings of 17th Annual (International) Conference on Mechanical Engineering-ISME-2009, May 2009, University of Tehran, Iran.
  • Saidi, M.S., and Saidi, M.H., Pirouzpanah, S., Nikparto, A.,Thermo-Hydrodynamic Modeling of a Single Bubble Nozzle-Diffuser Phase change Micropump, Proceedings of the Sixth International ASME Conference on Nanochannels, Microchannels and MinichannelsICNMM2008June 23-25, 2008, Darmstadt, Germany.
  • Khalafvand, S.S. and Saidi, M.S., Eulerian Modeling of Lung Deposition in a Respiratory Cycle with Horsfield and Weibel Models for Whole Lung and Five Lobes, Proceedings of 12th Asian Congress in Fluid Mechanics, Aug. 18-21, Dajeon, S. Korea, 2008.
  • Yousefi, M. and Saidi, M.S., Air flow field and micro-particle deposition in the three generation of human lung, Proceedings of 12th Asian Congress in Fluid Mechanics, Aug. 18-21, Dajeon, S. Korea, 2008.
  • Saidi, M. S., Mathematical modeling of transport of mainstream and side stream cigarette smoke aerosols, Keynote speaker , The 10th Fluid Dynamics Conference, 2007, Yazd, Iran
  • Saidi, M.S., Developing a virtual cigarette, a step by step approach, Keynote speaker, ISME2006, May 16-8, 2006, Isfahan, Iran.
  • Saidi, M.S.,Hajaligol, M.R., and Lipowicz, P.J., A Numerical Investigation of the intrapuff Smoke Aerosol Delivery, Proceedings of Frontiers in Aerosol Dosimetry, Conference, University of California, Irvine, California, October 23-25, 2005.
  • Mhaisekar, A., Hajaligol, M.R., and Saidi, M.S., A Modeling Investigation of the Air Flow in a Burning Cigarette, Proceedings of Frontiers in Aerosol Dosimetry, Conference, University of California, Irvine, California, October 23-25, 2005.
  • Saidi, M.S., Rasouli, F., and Hajaligol, M.R., Heat transfer coefficient for a packed bed of shredded materials at low Peclet numbers, Heat Transfer Engineering, 2006, Vol. 27, Num. 7, pp. 41-50.
  • Hajaligol,M.R., Florczak,E., Wójtowicz, M.A., and Saidi, M.S., The Formation Kinetics of Volatiles from Pyrolysis of Plant Materials, Proceedings of The 32nd Annual Conference on Thermal Analysis Application, Williamsburg, Virginia, October 4-6, 2004
  • Saidi, M.S., Hajaligol, M.R., and Rasouli, F., An experimental and numerical analysis of puff hydrodynamics, Beitr. Tabakfosch. Int., 2004, Vol. 21, pp. 157-166.
  • Saidi, M.S., Hajaligol, M.R., and Rasouli, F., Numerical simulation of a burning cigarette during puffing, J. Anal. Appl. Pyrolysis, 2004, Vol. 72, pp. 141-152.
  • Saidi,M.S. and Saghafian, M., Heat transfer enhancement in perturbed laminar flow about a cylinder, Heat Transfer Engineering, Vol. 25, pp. 63-73, 2004.
  • Saidi, M. S., Hajaligol, M.R., and Subbiah, M., Three-dimensional modeling of a conventional cigarette, Proceedings of 6th Philip Morris USA Symposium on Fundamental Science, Richmond, VA, Oct. 26-28, 2004.
  • Saidi, M.S. and Hajaligol, M.R., Gas diffusion coefficient through a cigarette wrapper paper, Proceedings of 6th Philip Morris USA Symposium on Fundamental Science, Richmond, VA, Oct. 26-28, 2004.
  • Saidi, M.S. and Hajaligol, M.R., A five precursor model for predicting product yields and distribution from tobacco pyrolysis, Proceedings of 6th Philip Morris USA Symposium on Fundamental Science, Richmond, VA, Oct. 26-28, 2004.
  • Saidi, M.S., and Kane, D.B., Design and characterization of a rapid aliquot sampling and dilution system for particle size characterization of cigarette smoke, Proceedings of the 23rd Annual AAAR Conference, Atlanta, GA, Oct. 2004.
  • Saghafian, M., Stansby, P.K., Saidi, M.S., and Apsly, D., Simulation of turbulent flows around a circular cylinder using nonlinear eddy-viscosity modeling: steady and oscillatory ambient flows, Journal of Fluids Structures, Vol. 17, Issue 8, pp. 1213-1236, July 2003.
  • Saidi, M.S., Hajaligol, M.R., Rasouli, F., Lipowicz, P. J., Shafer, K. H., and Rostami, M. S., An experimental and modeling study to predict product yields during puffing, Proceedings of 5th Philip Morris USA Symposium on Fundamental Science, Richmond, VA, Oct. 28-30, 2003.
  • Saidi, M.S., Shafer, K.H., and Lipowicz, P.J., A parametric study of transport of aerosol particles in a heterogeneous shredded porous media, Proceedings of 5th Philip Morris USA Symposium on Fundamental Science, Richmond, VA, Oct 28-30, 2003.
  • Saidi, M.S., Lipowicz, P.J. and Shafer, K.H., Mathematical modeling of transport of aerosol particles in a heterogeneous shredded porous media,Proceedings of the 22nd Annual AAAR Conference, Anaheim, CA, Oct. 20-24, 2003.
  • Saidi, M.S., Shafer, K.H. and Lipowics,P.J., A parametric study of transport of aerosol particles in a heterogeneous shredded porous media, Proceedings of the 22nd Annual AAAR Conferenc, Anaheim, CA, Oct. 20-24, 2003.
  • Kane, B.D., Saidi, M.S., and Lipowics,P.J., Spectral extinction for real-time sizing of high concentration, submicron aerosols, Proceedings of the 22nd Annual AAAR Conferenc, Anaheim, CA, Oct. 20-24, 2003.
  • Saidi, M.S.,Rasouli, F. and Hajaligol,M.R., Heat transfer coefficient for a packed bed of shredded materials, Proceedings of the 2003 ASME International Mechanical Engineering Congress, Washington, DC, Nov. 15-21, 2003.
  • Saidi, M.S., Hajaligol, M.R. and Rasouli, F., Mathematical modeling of transport of aerosol particles in a heterogeneous shredded porous media, Proceedings of 57th TSRC conference, Norfolk, VA, Sept. 21-24, 2003.
  • Saidi, M.S., Hajaligol, M.R. and Rasouli, F., A three-dimensional numerical simulation for the gaseous species in a forward moldering process such as cigarette puffing, Proceedings of 57th TSRC conference, Norfolk, VA, Sept. 21-24, 2003.
  • Saidi, M.S., Hajaligol, M.R., and Rasouli, F., Determining the hydrodynamic parameters of a puffing cigarette, Proceedings of 4th Philip Morris USA Symposium on Fundamental Science, Richmond, VA, Nov. 12-14, 2002.
  • Saidi, M. S., Analysis of collision of the smoke aerosols with cigarette rod tobacco shreds during puffing, Proceedings of 4th Philip Morris USA Symposium on Fundamental Science, Richmond, VA, Nov. 12-14, 2002.
  • Saidi, M.S., Analysis of collision of the smoke aerosols with cigarette rod tobacco shreds during puffing, Proceedings of 4th Annual Symposium on Fundamental Science. Nov. 12-14, 2002, Richmond, Virginia.
  • Saidi, M.S., Hajaligol, M.R. and Rasouli, F. Determining the hydrodynamic parameters of a puffing cigarette, Proceedings of 4th Annual Symposium on Fundamental Science. Nov. 12-14, 2002, Richmond, Virginia.
  • Saidi, M.S., Transport of gaseous species in a cigarette during puffing, NTR quarterly meetings, Philip Morris USA, Nov 21,2002.
  • Saidi, M.S., Three dimensional numerical simulation of puff hydrodynamics, Cigarette and Modeling Forum, Philip Morris USA, Oct 16, 2002.
  • Hossein Nezhad, A. and Saidi,M.S., Numerical simulation of the interaction of nonlinear water waves with a combined cylinder, Proceedings of The 9th Asian Congress of Fluid Mechanics, May 27-31, 2002, Isfahan, Iran.
  • Saghafian, M. , Stansby, P.K. and Saidi, M.S., Numerical calculation of turbulent flow over a circular cylinder using a non-linear eddy viscosity model, Proceedings of The 9th Asian Congress of Fluid Mechanics, May 27-31, 2002, Isfahan, Iran.
  • Saghafian, M. and Saidi, M.S., Numerical calculation of three dimensional laminar sinusoidal flow over a circular cylinder, Proceedings of The 9th Asian Congress of Fluid Mechanics, May 27-31, 2002, Isfahan, Iran.
  • Saidi, M.S. and Hossein-Nezhad, A., Solution of the problem of non-linear wave radiation of a combined cylinder in the sea, Proceedings of the Ninth Annual ISME Conference, May 2001, Department of Mechanical Eng., Gilan University, Rasht, Iran.
  • Saidi,M.S. and Hossein Nezhad, A. ,The nonlinear wave radiation of a truncated circular cylinder by time domain, Proceedings of the 6th Canadian Marine Hydromechanics and Structures, May 2001, UBC, Canada.
  • Saidi, M.S. and Saghafian, M., The study of Kinematics and dynamics of oscillating laminar flow about a cylinder, Esteghlal Journal of Engineering, Vol. 20, No. 1, Sept 2001.
  • Saidi, M.S. and Hossein Nezhad, A. ,An improved numerical algorithm to simulate the interaction of nonlinear water waves with fixed large objects, Iranian Journal of Science & Eng., Vol. 25, No.B4, Transaction B, Autumn 2002.
  • Saidi, M.S. and Saghafian, M. ,Heat Transfer Enhancement in Unsteady Laminar Flow About a Cylinder, Proceedings of ASME conference NHTC 2001, California, USA.
  • Saidi, M.S. and Nazary, A. ,Analysis of irregular wavemakers using linear diffraction theory, Proceedings of The International Conference on Hydraulic Structures, May 2001, Kerman, Iran.
  • Saidi, M.S. ,Calculation of hydrodynamic coefficients of a TLP using boundary integral method, Proceedings of The International Conference on Hydraulic Structures, May 2001, Kerman, Iran.
  • Saidi, M.S. and Zamani, A.R. ,Hydrodynamic analysis of SBM upon irregular sea waves, Proceedings of the Eighth Annual ISME Conference, May 2000, Sharif University of Technology, Tehran, Iran.
  • Hossein-Nezhad, A. and Saidi, M.S., Analysis of sea waves about a large combined cylinder by non-linear diffraction theory, Proceedings of the Eighth Annual ISME Conference, May 2000, Sharif University of Technology, Tehran, Iran.
  • Saghafian, M. and Saidi, M.S. ,Calculation of hydrodynamic and thermal coefficients of waves about a cylinder by numerical solution of Navier Stokes equations, Proceedings of the Eighth Annual ISME Conference, May 2000, Sharif University of Technology, Tehran, Iran.
  • Saidi, M.S. ,Analysis of near wall effect on adjacent floating bodies, Proceedings of The Sixth Fluid Dynamics Conference, Iran Science and Technology University, Feb 2000, Tehran, Iran.
  • Saghafian, M. and Saidi, M.S. ,Analysis of laminar sinusoidal flow about a cylinder, Proceedings of The Sixth Fluid Dynamics Conference, Iran Science and Technology University, Feb 2000, Tehran, Iran.
  • Saidi, M.S. ,Calculation of hydrodynamic coefficients of a set of vertical floating cylinders under harmonic waves, Proceedings of The Sixth Fluid Dynamics Conference, Iran Science and Technology University , Feb 2000, Tehran, Iran.
  • کیهان بابایی و محمدسعید سعیدی، "بررسی نتایج شبیه سازی پخش آلایندگی در سطح شهر در فلوینت و مقایسه آن با نرم افزار فلوداین"، ششمین همایش ملی مدیریت آلودگی هوا و صدا، 1396
  • کیهان بابایی و محمدسعید سعیدی، "شبیه سازی میزان انتشارNOx خارج شده از موتور هواپیمای 747 سری 400 درحین فرآیند تقرب به فرودگاه مهرآباد و تاثیر آن در مناطق اطراف"، ششمین همایش ملی مدیریت آلودگی هوا و صدا، 1396
  • حسین نعمتی، محمدسعید سعیدی و وحید حسینی، "محاسبه نشست ذرات در دستگاه تنفسی طی چند سیکل پیاپی"، ششمین همایش ملی مدیریت آلودگی هوا و صدا، 1396
  • رامتین روحانی، محمد ضابطیان، محمد حسن سعیدی، محمد بهشاد شفیعی، محمدسعید سعیدی، شهاب حقایق، تحلیل پایداری و همگنی سوسپانسیون فرآوری شده از میکروذرات پلیمری به کمک اندازه‌گیری نور عبوری لیزر، بیست و یکمین همايش سالانه بین‌المللی مهندسي مکانيک ايران ISME2013-386
  • ریسمانیان م.، سعیدی م. س.، فیروزآبادی ب.، استخراج ضريب پخش و انرژي پتانسيل موثر كانال پروتئيني سديم، اولین همایش بین‌المللی نانو ، 1392.
  • محمد ضابطیان، محمد حسن سعیدی، محمد بهشاد شفیعی، محمدسعید سعیدی، رامتین روحانی، علیرضا صراف، شهاب حقایق، پراکنده سازی میکروذرات در فاز مایع به کمک یک فرآیند جدید در فرآوری مخلوط، بیستمین همایش سالانه بین المللی مهندسی مکانیک ایران، دانشگاه شیراز، اردیبهشت 1391. ISME2012-2508
  • سید مصطفی قریشی، محمدسعید سعیدی، محمدعلی نوابی شیرازی، بهار فیروزآبادی، رضا شعبانیان، عبدالرزاق کیانی، "نوسانی کردن جریان خون ورودی به ریه‌ها در جراحی فونتن، به کمک مدلسازی عددی"، بیستمین همایش سالانه بین المللی مهندسی مکانیک ایران ISME 2012، دانشکده مهندسی مکانیک، دانشگاه شیراز، شیراز، ایران
  • سلمان سهرابی، محمدسعید سعیدی، مریم سعدتمند، "مدلسازی سه بعدی فرآیند تغلیظ ادرار در مدولای خارجی"، نوزدهمین کنفرانس مهندسی پزشکی ایران ICBME 2012
  • میلاد ریسمانیان، محمدسعید سعیدی، بهار فیروزآبادی، "بررسي تحليلي مدل انتقال جرم فيك و ارايه ي مدل تاخيري با استفاده ازشبيه سازي ديناميك ملكولي"، بیستمین همایش سالانه بین المللی مهندسی مکانیک ایران ISME 2012، دانشکده مهندسی مکانیک، دانشگاه شیراز، شیراز، ایران
  • امیر کیومرثی اسکوئی، محمدسعید سعیدی، بهار فیروزآبادی، "شبیه سازی عددی سلول اندوتلیال در حالت-های سوسپانسیون و چسبیده به سطح"، بیستمین همایش سالانه بین المللی مهندسی مکانیک ایران ISME 2012، دانشکده مهندسی مکانیک، دانشگاه شیراز، شیراز، ایران
  • امیرفرزاد فروغی، محمدسعید سعیدی، "تعیین جنس و اندازه ذرات با استفاده از اسپکترومتر با پراکندگی نور چند زاویه ای"، بیستمین همایش سالانه بین المللی مهندسی مکانیک ایران ISME 2012، دانشکده مهندسی مکانیک، دانشگاه شیراز، شیراز، ایران
  • سيد محمد صادق مرتضوي و محمد سعيد سعيدي، شبيه سازي انتقال و تبادل اكسيژن در واحد تبادل گاز ريه، هجدهمين همايش سالانه بين المللي مهندسي مكانيك ايران، ISME 2010 ، دانشگاه صنعتي شريف، 21 لغايت 23 ارديبهشت ، 1389ايران تهران
  • رامین داستانپور، مژده منجزی، محمدسعید سعیدی، شبیه سازی ساختار ریه و جذب ذرات در آن، فصلنامه علمی پژوهشی مهندسی پزشکی زیستی، 89
  • مژده منجزی، رامین داستانپور، محمدسعید سعیدی، احمدرضا پیشه ور، "مدلسازی چند مقیاسی دستگاه تنفسی"، نوزدهمین کنفرانس سالانه مهندسی مکانیک، ISME2011، دانشگاه بیرجند، بیرجند، ایران، 2011
  • علي قلي زاده، محمد حسن سعيدي، محمد بهشاد شفيعي، محمد سعيد سعيدي، ارزيابي تقاضاي انرژي در گرمايش و سرمايش بخش خانگي، اولين كنفرانس بين المللي گرمايش، سرمايش و تهويه مطبوع، ايران، تهران، خرداد 1388.
  • ابولفضل ايراني رهقي، محمدسعید سعيدي، محمد حسن سعيدي، و محمد بهشاد شفيعي، شبيه سازي احتراق در ابعاد ميكرو و بررسي اثر اعمال شرط مرزي لغزشي و خزش دمايي روي ميدان جريان و دما، سومين كافرانس سوخت و احتراق ايران، تهران- دانشگاه صنعتي امير كبير- اسفند ماه 1388
  • مجيد عشوري، محمد بهشاد شفيعي، محمد سعيد سعيدي، محمد حسن سعيدي، بررسي تجربي معادله برنولي در سيال مغناطيسي، دوازدهمين كنفرانس ديناميك شاره‌ها، دانشگاه صنعتي نوشيرواني بابل، 10-8 ارديبهشت 1388.
  • احمد آسيابان، محمد سعيد سعيدي، احمدرضا عظيميان، احسان الله سعادتي، شبيه‌سازي جريان هوا در بخش‌هاي مختلف ريه انسان به منظور تعيين پارامترهاي مدل فشرده معادل ريه، هفدهمين كنفرانس سالانه (بين‌المللي) مهندسي مكانيك ISME 2009 دانشگاه تهران- ارديبهشت 1388 .
  • رامين داستانپور، مژده منجزي، محمد سعيد سعيدي، شبيه‌سازي ساختاري و بررسي جذب و انتقال ذرات در مجاري ريوي، دوازدهمين كنفرانس ديناميك شاره‌ها دانشگاه انوشيرواني بابل-8-10 ارديبهشت 1387.
  • وحيد رضايي، احمد رضا پيشه ور، محمد سعيد سعيدي، بررسي عددي جريان مذاب داخل قالب با روشSPH، هفدهمين كنفرانس سالانه (بين‌المللي) مهندسي مكانيك ISME 2009 دانشگاه تهران- ارديبهشت 1387.
  • احسان اله سعادتي محمد سعيد سعيدي، احمدرضا عظيميان، احمد آسيابان، شبيه‌سازي جذب ذرات دود سيگار بر روي حبابچه‌هاي ريه انسان، دوازدهمين كنفرانس ديناميك شاره‌ها دانشگاه انوشيرواني بابل-8-10 ارديبهشت 1387.
  • مرتضي يوسفي، محمد سعيد سعيدي، بررسي الگوي جريان وجذب مايكروذرات درسه نسل ازمجاري دستگاه تنفسي انسان، يازدهمين كنفرانس ديناميك شاره‌ها، خرداد 1386 دانشگاه صنعتي خواجه نصيرالدين طوسي، دانشكده مهندسي مكانيك.
  • سيد سعيد خلفوند، محمد سعيد سعيدي، مدل اويلري جذب ذرات در طي يك سيكل تنفسي، يازدهمين كنفرانس ديناميك شاره‌ها، خرداد 1386 دانشگاه صنعتي خواجه نصيرالدين طوسي، دانشكده مهندسي مكانيك.
  • عباس نصر آزاداني، محمد رضايي علم، محمدسعید سعيدي، محسن ثقفيان، بررسي جريان غير دائم در ميكروپمپ هاي جريان كزج با استفاده از روش برهم نهادن شبكه ها، يازدهمين كنفرانس ديناميك شاره‌ها، خرداد 1386 دانشگاه صنعتي خواجه نصيرالدين طوسي، دانشكده مهندسي مكانيك.